Takedown recurve build along (All Done)

[Dmaxshawn]

Brushwolf  I use that same robo sander in my press too for shaping glue joints   work pretty darn awesome without having to mod the big edge sander.  

Looking good bud

[BrushWolf]

Once the riser was fit it is time to move on to the stripe.

[BrushWolf]

I forgot to take pics before the glue up. What I did was cut out 1"x1"x2" square blocks. I then cut white and black phenolic 1"x2". This is what I ended up with. The block are Koa and walnut .

 

I glued everything together with smooth - on.  So into the oven for along wait.   :rolleyes:

[Dmaxshawn]

Thats going to be an awesome looking Mosaic strip Bud

[kennym]

Cool stuff Mike!!

[Dan Bonner]

Excellent, I'll be watching this one!
Bonner

[BrushWolf]

So after the stripe is set it's time cut out some strips. The strips got sanded down to 0.050. I then sanded down white phenolic. It got sanded to about 0.035. The next thing to do is mix up more glue and put everything together.

Ready to go back into the oven.


 

[BrushWolf]

Here is what I have so far after the block was cleaned up a little.

 

And a closeup.


 

[Dan Bonner]

That is awesome! A fine chunk of Koa too. The mosaic stripe really distinguishes the Flare. Looks a little like a Blacktial , but without the CNC.This is gonna be a sweet bow! I always struggled with robosanders. You have made pattern sanding look easy.

Bonner

[kbetts]

You're really stepping up your game.  Such talent.

[BrushWolf]

Originally posted by Dan Bonner:
That is awesome! A fine chunk of Koa too. The mosaic stripe really distinguishes the Flare. Looks a little like a Blacktial , but without the CNC.This is gonna be a sweet bow! I always struggled with robosanders. You have made pattern sanding look easy.

Bonner

Thanks Dan I was trying to set each piece of wood off with the stripe. I thought the mosaic would be a nice touch. Wasn't really trying to make it look like a blacktail. I hope it turns out how I have it pictured. Can't hardly wait to cut the limb veneers.   :eek:

[BrushWolf]

As far as CNC goes this is about as fancy as I get. Time to put in the shelf.

There is only one thing bad about doing it this away. It can make petty big mess.

 

[BrushWolf]

The shelf is pretty much done.

 

[BrushWolf]

For me the most exciting parts are to come. The riser is finally starting take shape. I'm cutting out the riser to put on some overlays.

 

[Trux Turning]

Very nice!! I'm enjoying this one.

[bigbob2]

Looking great!.

[talkingcabbage]

[BrushWolf]

Thanks guys. I will try to get some more pics up tomorrow.

[Buemaker]

Allright, looking good. Bue--.

[longrifle]

My my my,that is one great looking riser,this build a long is gonna be fun.