Author Topic: Some new ones in the work  (Read 881 times)

Offline bowhntineverythingnh03743

  • Trad Bowhunter
  • **
  • Posts: 1201
Some new ones in the work
« on: September 17, 2013, 05:18:00 PM »
Hey guys just wanted some input on these bows that are in the works. What do you guys think of the tiller on them. I hope to finish them in the next couple days... Thanks

 

 

Tried a different grip on this bow for fun... Feels slightly different but solid in my hand.. Just got to get used to the finger locators.

 

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: Some new ones in the work
« Reply #1 on: September 17, 2013, 05:31:00 PM »
Looks nice, Justin..

Offline chackworth3

  • Trad Bowhunter
  • **
  • Posts: 580
Re: Some new ones in the work
« Reply #2 on: September 17, 2013, 06:05:00 PM »
Looks good!

Offline bigbob2

  • Trad Bowhunter
  • **
  • Posts: 2160
Re: Some new ones in the work
« Reply #3 on: September 17, 2013, 06:24:00 PM »
Look first rate to me!.

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Re: Some new ones in the work
« Reply #4 on: September 17, 2013, 08:05:00 PM »
Very nice!

Offline Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6076
Re: Some new ones in the work
« Reply #5 on: September 17, 2013, 09:02:00 PM »
The bottom pic looks good. The top one looks to need the tips stiffened a bit.
High on Archery.

Offline BrushWolf

  • Trad Bowhunter
  • **
  • Posts: 1718
Re: Some new ones in the work
« Reply #6 on: September 17, 2013, 09:08:00 PM »
Lookin good. Like the finger grooves.
Kids who hunt, trap, & fish don't mug little old ladies.

Offline JJB

  • Trad Bowhunter
  • **
  • Posts: 1719
Re: Some new ones in the work
« Reply #7 on: September 17, 2013, 09:26:00 PM »
Looking good from here! I also like the looks of the finger grooves.
-Jay

Offline Trux Turning

  • Trad Bowhunter
  • **
  • Posts: 1814
Re: Some new ones in the work
« Reply #8 on: September 17, 2013, 10:33:00 PM »
I really like the way the second one is bending..are they both the same design?

Online Razorbak

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 819
Re: Some new ones in the work
« Reply #9 on: September 18, 2013, 12:03:00 AM »
looking good Justin
TGMM Family of the Bow

Offline bowhntineverythingnh03743

  • Trad Bowhunter
  • **
  • Posts: 1201
Re: Some new ones in the work
« Reply #10 on: September 18, 2013, 12:08:00 AM »
The top one is a straight limb design. 1 1/8 inch at the fades to 1/2 tips. It is 64 inch tip to tip and 57# @28 inches. The bottom one is 62 tip to tip Kenny M R/D design. Maple core and black glass. I just should have turned the action wood riser but it will still work. My bad... It was my first time using this stuff.

Offline cunruhshoot

  • Trad Bowhunter
  • **
  • Posts: 574
Re: Some new ones in the work
« Reply #11 on: September 18, 2013, 02:55:00 AM »
Both look great from here!
As Iron sharpens Iron so one person sharpens another...Prov. 27:17

Offline bowhntineverythingnh03743

  • Trad Bowhunter
  • **
  • Posts: 1201
Re: Some new ones in the work
« Reply #12 on: September 18, 2013, 07:45:00 PM »
Thanks guys... Hope to start spraying them tomorrow.

Offline bowhntineverythingnh03743

  • Trad Bowhunter
  • **
  • Posts: 1201
Re: Some new ones in the work
« Reply #13 on: September 22, 2013, 04:47:00 AM »
Started on spraying these two bows... The straight hill style is just about ready. Just need to letter up and sign the black glass one.

 
 
 

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: Some new ones in the work
« Reply #14 on: September 22, 2013, 09:35:00 AM »
Nice Justin, what do you spray with, a can or gun and what did you use?

Offline bowhntineverythingnh03743

  • Trad Bowhunter
  • **
  • Posts: 1201
Re: Some new ones in the work
« Reply #15 on: September 22, 2013, 04:33:00 PM »
Spray spar urethane right now Roy

Offline bowhntineverythingnh03743

  • Trad Bowhunter
  • **
  • Posts: 1201
Re: Some new ones in the work
« Reply #16 on: September 22, 2013, 04:49:00 PM »
sorry for double tapping... was uploading with my phone in the woods with gloves... FAIL!

Offline bowhntineverythingnh03743

  • Trad Bowhunter
  • **
  • Posts: 1201
Re: Some new ones in the work
« Reply #17 on: September 22, 2013, 04:50:00 PM »
First night out with a new bow is always special!

Online Razorbak

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 819
Re: Some new ones in the work
« Reply #18 on: September 22, 2013, 09:15:00 PM »
real sweet....cant wait to see you kill with it Justin
TGMM Family of the Bow

Offline bowhntineverythingnh03743

  • Trad Bowhunter
  • **
  • Posts: 1201
Re: Some new ones in the work
« Reply #19 on: September 23, 2013, 04:01:00 AM »
Don't mind the goofy looking guy lol

 

Hey Razor... how do I get one of those side quivers from ya???

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©