« previous next »
Pages: [1]   Go Down

Author Topic: i beam construction  (Read 921 times)

Offline -snypershot317-

  • Trad Bowhunter
  • **
  • Posts: 221
i beam construction
« on: October 21, 2013, 07:16:00 PM »
i know that i have posted on here looking for a person to make a riser, and said that i am not a good wood worker but i think i have decided to go ahead and try to make my own. if it fails i learned one way not to make a riser    :knothead:  but after reading and seeing a bunch of very beautiful bows made on here i decided i would go ahead and try to attempt to build a riser and then maybe a full bow. My questions are 1) how does one build an ibeam riser and 2) would red oak, cherry, mahogany, black walnut, maple, ash or combinations of said woods be good woods to work with? these woods are what i have readily available and on hand. the riser i have planned is for about a 15-17 inch riser (havent decided yet) 55# recurve. if any more info is needed i will be glad to give it. thank you again for all the help and information  :)
Logged
"Now then, get your weapons-your quiver and bow-and go out to the open country to hunt some wild game for me." ~Gen 27:3

"But as for me and my household, we will serve the Lord." ~Joshua 24:15b

Offline -snypershot317-

  • Trad Bowhunter
  • **
  • Posts: 221
Re: i beam construction
« Reply #1 on: October 21, 2013, 07:19:00 PM »
i forgot to add that the total length of the bow would be somewhere between 56-58" unstrung...if that helps any  :p
Logged
"Now then, get your weapons-your quiver and bow-and go out to the open country to hunt some wild game for me." ~Gen 27:3

"But as for me and my household, we will serve the Lord." ~Joshua 24:15b

Offline Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6076
Re: i beam construction
« Reply #2 on: October 21, 2013, 07:42:00 PM »
If this is a one piece then about any of the above in combo would work--glass on both sides.
Now a takedown is a different animal. Ash would make a good beam as would hard maple. Ibeam construction is three pieces glued together running the length of the riser. Also on a takedown a couple of layers of glass on the front will strengthen things up to.  
Logged
High on Archery.

Offline -snypershot317-

  • Trad Bowhunter
  • **
  • Posts: 221
Re: i beam construction
« Reply #3 on: October 21, 2013, 08:04:00 PM »
it is a three piece take down. i am not sure if this is even possible but i would like to stay away from any non-nature products (not trying to sound tree hugger-ish or bashing man made stuff) like phenolics, micarta, g10, and fiberglass...ive worked with them before and i honestly dont care for them in a working perspective so im trying to stay with all wood or wood and bone/antler...just trying to make sure i do it right; but if not its no big deal...lol
Logged
"Now then, get your weapons-your quiver and bow-and go out to the open country to hunt some wild game for me." ~Gen 27:3

"But as for me and my household, we will serve the Lord." ~Joshua 24:15b

Offline -snypershot317-

  • Trad Bowhunter
  • **
  • Posts: 221
Re: i beam construction
« Reply #4 on: October 21, 2013, 08:05:00 PM »
that is a very cool riser too..i like the red in it and shape. its very nice looking    :thumbsup:
Logged
"Now then, get your weapons-your quiver and bow-and go out to the open country to hunt some wild game for me." ~Gen 27:3

"But as for me and my household, we will serve the Lord." ~Joshua 24:15b

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Re: i beam construction
« Reply #5 on: October 22, 2013, 11:40:00 AM »
I think you'd be fine with any of the woods mentioned. If you concerned about strength you can just make it a little bulkier, but I wouldn't worry a ton. I don't know about mahogony how strong it is .... but the others shoudl be ok. Of the lot, black walknut is probably the weakest.
Logged

Offline -snypershot317-

  • Trad Bowhunter
  • **
  • Posts: 221
Re: i beam construction
« Reply #6 on: October 22, 2013, 12:41:00 PM »
ok thank you. i also have access to birch and hickory...i will try to avoid using black walnut and mahogany then seems how they could be structurally unsound. i really dont want the bow to fly apart in my face    :eek:
Logged
"Now then, get your weapons-your quiver and bow-and go out to the open country to hunt some wild game for me." ~Gen 27:3

"But as for me and my household, we will serve the Lord." ~Joshua 24:15b
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©