« previous next »
Pages: [1]   Go Down

Author Topic: Tape width  (Read 503 times)

Offline T Folts

  • Trad Bowhunter
  • **
  • Posts: 1922
Tape width
« on: November 23, 2013, 10:02:00 AM »
Is there any tape available at 1.5 inches, the blue tape is 1.41 and drives me nuts.It used to be 1.5 whats up with that.
Logged
US ARMY 1984-1988

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Re: Tape width
« Reply #1 on: November 23, 2013, 11:34:00 AM »
If I had to guess I imagine they wen't metric .... 1.41" is almost exactly 35.5mm
Logged

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17340
Re: Tape width
« Reply #2 on: November 23, 2013, 11:43:00 AM »
I found both at our wm store, so got the 1.5
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: Tape width
« Reply #3 on: November 23, 2013, 01:47:00 PM »
Why does it bother you? I've been using tape that's wider than the glass for many years, just align it with one edge and trim the tape along the other edge with a utility knife. It takes seconds.
Logged

Offline David Flanrey

  • Trad Bowhunter
  • **
  • Posts: 960
Re: Tape width
« Reply #4 on: November 23, 2013, 08:24:00 PM »
Bowjunkie, his glass is wider than the 1.41 tape.  I had the same problem.  

T Folts, 3M makes a true 1.50 tape.  Works very well.  Got mine at ACE.
Logged

Offline 2treks

  • Trad Bowhunter
  • **
  • Posts: 5193
Re: Tape width
« Reply #5 on: November 24, 2013, 06:39:00 AM »
Buy 1.75 or 2" and do like Bowjunkie says(I use a mill file to trim)Done for years as well
or,
Just run the 1.41 down the middle. It is only .0045" on each side. By the time you clean up your squeeze out its fine.
Logged
C.A.Deshler
United States Navy.
1986-1990


"Our greatest fear should not be of failure but of succeeding at things in life that don't really matter.”
~ Francis Chan

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: Tape width
« Reply #6 on: November 24, 2013, 07:11:00 AM »
Yep, buy wider tape, put it on aligning it with one edge, and trim the other.
Logged

Offline T Folts

  • Trad Bowhunter
  • **
  • Posts: 1922
Re: Tape width
« Reply #7 on: November 24, 2013, 08:59:00 AM »
I have been using the 1.41 and running down the middle, looked around here and all the stores carry 1.41 only WM, HD ect, I'll look at ace.
I Have used the 2 and trimed it that works just waste.
Logged
US ARMY 1984-1988
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©