Gluing bows to things

[Hill Hunter]

Saw this mentioned on the swap form and it made me wonder. has anyone accidentally glued a bow to something?
it made me wonder because about a month ago I was working on a bow, I had a void in a glue line in the riser about 3/16 long, I laid it on my workbench and began to work CA into it, after what seemed to be way to much glue I took a break, and the though hit me " I hope I am not gluing my bow to my bench. I pulled gave it a nudge and sure enough the glue was running straight through and was starting to set up. a little clean up and a piece of tape and all was good.
just wondering if I am the only one.  

[bamboo]

I've glued a few to my hand!!using superglue as a grain filler

[takefive]

I wound up glueing my second all wood tri-lam to the form.  There was a small hole in the plastic wrap that I didn't notice.  So I figured I'd just pry it off with a long screwdriver.  Sure enough; cracked the belly lam.       Live and learn.    :rolleyes:

[red hill]

I've glued stuff to a bow. My pieces of padding during glue-up for example!

[jsweka]

Originally posted by bamboo:
I've glued a few to my hand!!using superglue as a grain filler

I can relate to that