Author Topic: Post your all wood bows. (Read 12311 times)

Srlbenn · « **Reply #80 on:** January 25, 2019, 06:00:31 PM »

This one I made for a friend. Osage with catfish skins.( Two bow's from the same fish)
Handle wrap is inner willow bark.

://i.imgur.com/PPCBDlk.jpg[/IMG]

Buemaker · « **Reply #81 on:** January 25, 2019, 06:05:12 PM »

Looking good.

buddyb · « **Reply #82 on:** February 03, 2019, 08:50:42 PM »

Here's a red oak board bow I made 42# @ 28".

Pat B · « **Reply #83 on:** February 03, 2019, 11:24:35 PM »

This is an osage selfbow I made and gave to Clint(osage outlaw). I called her "Tacky" and dressed her appropriately...

Buemaker · « **Reply #84 on:** February 04, 2019, 06:47:59 AM »

Nice bend on that one Pat, you sure know how to make them

Pat B · « **Reply #85 on:** February 04, 2019, 08:06:05 AM »

Thanks Bue. After so many years even a blind squirrel get an acorn.

Keith Wolfe · « **Reply #86 on:** March 06, 2019, 10:03:53 PM »

There's just a few I have pics of

BMorv · « **Reply #87 on:** March 07, 2019, 09:25:47 AM »

Nice looking bows Keith. Tiller looks good too.

Wolftrail · « **Reply #88 on:** March 07, 2019, 11:28:24 AM »

K. Wolfe I would be a little leary about cutting in a deep and long sight window on a wood bow. But thats just me as long as the bow does not take a direct smack on the side it should hold. Nice bow.

Keith Wolfe · « **Reply #89 on:** March 07, 2019, 03:33:42 PM »

I've heard that concern before but the profile is why I get away with it. I'll show a side view. Where it is cut in the farthest is where the bow is at full depth of 3 layers of 3/4" (just shy) wood. I've never had a failure in the handle and I'm at about ten years with this style. Did have a limb failure this year and that was the first in years. I kind of copied my recurve at the time and shortened the risers then used that on all my wood bows. My first gen. was pretty blocky. It has treated me well for a long time.

Wolftrail · « **Reply #90 on:** March 07, 2019, 04:39:03 PM »

" it is cut in the farthest is where the bow is at full depth of 3 layers " ..............gotcha.

Pat B · « **Reply #91 on:** March 07, 2019, 04:59:16 PM »

Nice woodworking but is it necessary for a simple wood bow?

Shredd · « **Reply #92 on:** March 07, 2019, 05:36:33 PM »

Great Thread and lots of Great looking Bows.... Much Respect to my Natural Bow Building Brothers out there...

Roy from Pa · « **Reply #93 on:** March 07, 2019, 05:41:15 PM »

Ok, who are you and what did ya do with, Shreddy?

LOL

I am always amazed at the beautiful risers you glass bow guys put together...

Flem · « **Reply #94 on:** March 07, 2019, 06:12:47 PM »

Do all grass Bows count?

Roy from Pa · « **Reply #95 on:** March 07, 2019, 06:28:12 PM »

Woah, you old bugger you.

Did ja make that?

Flem · « **Reply #96 on:** March 07, 2019, 06:47:29 PM »

Sho nuff did. Have a matching Loin cloth to go with it.

Roy from Pa · « **Reply #97 on:** March 07, 2019, 07:04:08 PM »

Atta boy...

504state · « **Reply #98 on:** March 08, 2019, 03:18:15 PM »

Here are a few of mine from when I first started. Far from perfect but they were fun. Have given most away. I got one glued up and have a Osage stave on the way.

Roy from Pa · « **Reply #99 on:** March 08, 2019, 04:08:37 PM »

News:

Author Topic: Post your all wood bows. (Read 12311 times)

Shredd

Users currently browsing this topic: