« previous next »
Pages: [1]   Go Down

Author Topic: 1st almost done//Thanks for all the help  (Read 429 times)

Offline bsv

  • Trad Bowhunter
  • **
  • Posts: 599
1st almost done//Thanks for all the help
« on: December 06, 2014, 09:33:00 AM »
I want to thank everyone for all the help,and response to all my millions of questions!!!   :bigsmyl:  here's the specs,red oak done with poorfolks build along. 70 inch 37# @ 28,blk walnut and maple riser and tips,rubbed on teak oil.it will get poly after 72hrs.I'm   :D   HOOKED   :D   hoping my next will be closer to my target weight of 50lbs.Thanks again. Burt
 
 
 
 
Logged
R/D's soon to come

Offline Al Dean

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 690
Re: 1st almost done//Thanks for all the help
« Reply #1 on: December 06, 2014, 09:57:00 AM »
I like it.  What is the backing?
Logged
TGMM Family of the Bow

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: 1st almost done//Thanks for all the help
« Reply #2 on: December 06, 2014, 09:58:00 AM »
Very nice, Burt. Make the next bow about 62 to 64 inches, it will help you increase the weight. And induce about 4 inches of reflex at glue up.
Logged

Offline bsv

  • Trad Bowhunter
  • **
  • Posts: 599
Re: 1st almost done//Thanks for all the help
« Reply #3 on: December 06, 2014, 12:20:00 PM »
Thanks guys, Al, the backing is linen,I used tb III to glue it on.Roy to induce reflex I would have to use a wood backer of some kind,would maple or cherry work? Burt
Logged
R/D's soon to come

Offline takefive

  • Trad Bowhunter
  • **
  • Posts: 1098
Re: 1st almost done//Thanks for all the help
« Reply #4 on: December 06, 2014, 03:51:00 PM »
Looking good.  Nice work on the tips and on getting a smooth taper on the handle fades.  Hard maple is a good backer as long as it is straight grained.
Logged
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: 1st almost done//Thanks for all the help
« Reply #5 on: December 06, 2014, 04:01:00 PM »
Hard maple 1/4 sawn and straight grain.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©