« previous next »
Pages: [1]   Go Down

Author Topic: How much to round off a hickory backing?  (Read 493 times)

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
How much to round off a hickory backing?
« on: March 18, 2015, 07:36:00 PM »
Hey guys

Hoping to get a hickory backed tri on the tree tonight.

How much do you round the edges of the hickory?
..I faceted and rounded the belly.

Seems like the backing being so thin should just get a nice rounding with sandpaper....while being sure the core doesn't "stick out" from the sides farther than the backing.
...am I on the right track?

thanks
Logged
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: How much to round off a hickory backing?
« Reply #1 on: March 18, 2015, 07:44:00 PM »
yes
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline LittleBen

  • Trad Bowhunter
  • **
  • Posts: 2970
Re: How much to round off a hickory backing?
« Reply #2 on: March 18, 2015, 08:48:00 PM »
Round that **** good.

You can't really round too much, but you can round too little,

So basically, round it the right amount and you'll be good  :)
Logged

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: How much to round off a hickory backing?
« Reply #3 on: March 18, 2015, 09:17:00 PM »
simple as pie
Logged
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: How much to round off a hickory backing?
« Reply #4 on: March 18, 2015, 11:35:00 PM »
I usually give about 3 or 4 scrapes with a scraper held at different angles than sand it smooth. The old books used to say to round the edges to the diameter of a pea; that's about 1/4". I don't go quite that far.
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: How much to round off a hickory backing?
« Reply #5 on: March 19, 2015, 01:01:00 AM »
thanks guys!
   :thumbsup:
Logged
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: How much to round off a hickory backing?
« Reply #6 on: March 19, 2015, 05:57:00 AM »
Yep, I do just like Pat said... 5 or 6 swipes with the cabinet scraper on each corner at varying angles, then sand it with 150 grit, then 240. Done. Less than 'pea radius' I think.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©