« previous next »
Pages: [1]   Go Down

Author Topic: Loose limb pin  (Read 340 times)

Online GregD

  • Trad Bowhunter
  • **
  • Posts: 407
Loose limb pin
« on: April 07, 2015, 05:40:00 PM »
I was looking for opinions on what to do with a takedown recurve that has a loose fit on the guide pin. Would you fill the existing hole in with epoxy and redrill the hole or are there better solutions? Any input appreciated. Thanks, Greg
Logged

Online jess stuart

  • Trad Bowhunter
  • **
  • Posts: 1722
Re: Loose limb pin
« Reply #1 on: April 07, 2015, 06:24:00 PM »
If it isn't really loose a bit of wax might take up enough slack. Wax works well on a slightly to loose fit in the locket socket takedown system.
Logged

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Re: Loose limb pin
« Reply #2 on: April 07, 2015, 06:30:00 PM »
Or spray some clear coat poly into the hole. It will take a few shots but it will fill in the hole a wee bit.

Is not wax a little soft for that Jess...?
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©