Author Topic: Hickory ? Drying  (Read 654 times)

Offline Poplar Hill

  • Trad Bowhunter
  • **
  • Posts: 6
Hickory ? Drying
« on: July 06, 2015, 10:22:00 AM »
Cut this down from property.  I believe it may be hickory.  It's about three inches or so at base.  Pretty straight.  I've painted the ends and marked the north facing side.  Do I need to debark to dry or is it better to leave it like it is.  Right now it's simply air drying.  
 

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Hickory ? Drying
« Reply #1 on: July 06, 2015, 11:12:00 AM »
As long as it grew straight and not twisted you can cut it in half, lengthwise and bind the two halves back together with spacers between to allow good air circulation. I have heard that you can remove the bark from green hickory without it checking but I've never tried it. I'd wait at least a month then remove the bark. You can seal the back(and ends) with shellac. It is easy to remove after without damaging the wood by wiping it off with alcohol.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: Hickory ? Drying
« Reply #2 on: July 06, 2015, 07:11:00 PM »
I've removed the bark from green summer cut hickory without sealing the back and 9 times out of 10 there's no checking. It largely depends on what you do with it afterwards. You could shellac it like Pat said to make sure it was safe.

Are you sure it's hickory? It doesn't look like the young hickories I've seen around here. The bark looks too rough. But it's hard to tell in pictures sometimes.

Offline Poplar Hill

  • Trad Bowhunter
  • **
  • Posts: 6
Re: Hickory ? Drying
« Reply #3 on: July 06, 2015, 10:14:00 PM »
Not sure of the wood.  Here's a pic, shot a minute ago with a flash.  Not sure it will help.

 

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Hickory ? Drying
« Reply #4 on: July 06, 2015, 10:48:00 PM »
The bark looks like flowering dogwood(Cornus florida). It makes a good bow.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Poplar Hill

  • Trad Bowhunter
  • **
  • Posts: 6
Re: Hickory ? Drying
« Reply #5 on: July 06, 2015, 10:55:00 PM »
Cool.  I can't wait to try working with it.  Thanks Pat.  I bought a 65 Chevy c10 from a fella in Brevard.  Nice town.

Offline Black Mockingbird

  • Trad Bowhunter
  • **
  • Posts: 342
Re: Hickory ? Drying
« Reply #6 on: July 07, 2015, 08:59:00 AM »
Yup...that's dogwood alright. The sooner you rough it out to a bow blank and get the bark off the sooner it will dry n be ready for u to work. Make sure to get its mc down to 6-8%...and heat treat the belly before serious bending past 18-20".

Offline Poplar Hill

  • Trad Bowhunter
  • **
  • Posts: 6
Re: Hickory ? Drying
« Reply #7 on: July 07, 2015, 10:23:00 PM »
Thanks mockingbird.  Need to get something to measure moisture.

Offline Bison Bows

  • Trad Bowhunter
  • **
  • Posts: 11
Re: Hickory ? Drying
« Reply #8 on: July 09, 2015, 01:18:00 PM »
Is it going to be a self bow or a sinew backed bow?

Offline Poplar Hill

  • Trad Bowhunter
  • **
  • Posts: 6
Re: Hickory ? Drying
« Reply #9 on: July 09, 2015, 04:39:00 PM »
Bison I've never attempted a sinew backed bow.  I've only done a red oak board bow that came out good.  So I guess I haven't decided.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©