Author Topic: newby question  (Read 328 times)

Offline newhouse114

  • Trad Bowhunter
  • **
  • Posts: 607
newby question
« on: July 31, 2015, 10:02:00 PM »
I am certainly not new to archery but I have never built a self bow yet. I am limited in what is available to me, south coastal oregon. I was wondering if anyone had ever used any of the wild fruit woods for a self bow. I have quite a bit of wild plum on my place and have been slowing working a stave I cut last fall. It is shaping up nice but I worry that it will snap the first time I try to get it to full draw. Still just thinning the limbs right now, haven't started to tiller. Thanks

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: newby question
« Reply #1 on: July 31, 2015, 10:30:00 PM »
The wild plum should make a pretty good bow. Get the limbs bending as soon as you can but only a little at a time. Exercise the limbs after each wood removal but never pull it past the intended draw weight or draw length.
 Post pics as you go along and you'll get lots of help. Its easier to tell you what's needed if we can see what you are talking about.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline newhouse114

  • Trad Bowhunter
  • **
  • Posts: 607
Re: newby question
« Reply #2 on: August 02, 2015, 09:28:00 PM »
I guess the plum is not going to be my first choice in the future. I was just flexing the limbs a bit and had catastrophic limb failure. The limb did not split, just snapped straight across! I guess I need to get out and find some pacific yew.

Offline mikkekeswick

  • Trad Bowhunter
  • **
  • Posts: 988
Re: newby question
« Reply #3 on: August 03, 2015, 02:35:00 AM »
No you have done something wrong. If you had reduced the plum correctly it would not have broken. Plum is top notch bow wood. Yew isn't magic!!! it has to be treated the same as any other stave.
I'd recommend buying the Traditional Bowyers Bible vol 1

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: newby question
« Reply #4 on: August 03, 2015, 08:25:00 AM »
I agree with Mike. Sound wood doesn't break just flexing it. Will you post pics of the break?
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©