Author Topic: How about a tri lam build along...  (Read 10514 times)

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: How about a tri lam build along...
« Reply #120 on: November 18, 2015, 06:23:00 PM »
Roy
I found me some Poplar for backings like you said

 
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
Re: How about a tri lam build along...
« Reply #121 on: November 18, 2015, 11:21:00 PM »
hey lookum- a pic of a Roybow!

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: How about a tri lam build along...
« Reply #122 on: November 19, 2015, 10:13:00 AM »
Bow is fine, but my shoulder is hurting more and more, so I can't pull the bow to shoot it in. See the Orthopedic Dr. again Dec 1st. Most likely will get an mri and then surgery..

Bow looks nice Mark..   :)

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: How about a tri lam build along...
« Reply #123 on: November 19, 2015, 10:26:00 AM »
Ship it over. I'll wrap it up for you and send it back.......crippled old buzzard anyway.

Offline canopyboy

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3106
Re: How about a tri lam build along...
« Reply #124 on: November 19, 2015, 02:54:00 PM »
Just keep raspin' on it until you can pull it. No reason to make it stronger than your bum shoulder -- you'll never be able to shoot it.
TGMM Family of the Bow
Professional Bowhunters Society

"The earth has its music for those who will listen." - Santayana

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: How about a tri lam build along...
« Reply #125 on: November 19, 2015, 04:52:00 PM »
Weight isn't the biggest problem. I can hardly raise my arm up when I bend my elbow like to draw a bow. Funny thing is though, I can move my arm all over the place and it doesn't bother me. Just hurts when the elbow is cocked as if to shoot.

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: How about a tri lam build along...
« Reply #126 on: November 19, 2015, 05:27:00 PM »
I know how that feels.
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online goobersan

  • Trad Bowhunter
  • **
  • Posts: 1386
Re: How about a tri lam build along...
« Reply #127 on: November 19, 2015, 05:47:00 PM »
Just get it fixed Roy. After 3 months you'll be pulling 30#. Almost your huntin weight aint it ?!??     :thumbsup:

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4254
Re: How about a tri lam build along...
« Reply #128 on: November 19, 2015, 06:19:00 PM »
Roy sorry to hear about the shoulder. And heck I can always use another one of your bows. Mine is an older model just 2 Osage and boo. Funny thing it still is the bow folks like most when I am showing off my bows.

I wouldn't trade it or any of the others I have received for anything.

Get well soon and start massaging I mean thumping folks again.   :bigsmyl:    :archer:

Offline jsweka

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3571
Re: How about a tri lam build along...
« Reply #129 on: November 19, 2015, 06:45:00 PM »
That's a bummer Roy.  Get it fixed, rehabbed, and get this this build along done.
>>>---->TGMM<----<<<<

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: How about a tri lam build along...
« Reply #130 on: November 19, 2015, 07:17:00 PM »
It was done tillered on page 7 John. Just needs shot, then tiller check, then stain and sealed.

Offline razorback

  • Trad Bowhunter
  • **
  • Posts: 2166
Re: How about a tri lam build along...
« Reply #131 on: November 19, 2015, 08:04:00 PM »
Sorry to hear that Roy. My dad (70's) had same issue, could move his arm all over the place except for one direction. If I remember right it was also holding it straight out in front of him. He could still drink a beer though.
Oh I think he also had trouble wiping his butt, you got that problem?
Keep the wind in your face and the sun at your back.

Online goobersan

  • Trad Bowhunter
  • **
  • Posts: 1386
Re: How about a tri lam build along...
« Reply #132 on: November 19, 2015, 10:00:00 PM »
:laughing:

Offline mikkekeswick

  • Trad Bowhunter
  • **
  • Posts: 988
Re: How about a tri lam build along...
« Reply #133 on: November 20, 2015, 03:04:00 AM »
I feel for you Roy, having an injury that stops you doing what you love is a nightmare. I've been there and got that t-shirt.
I'll send you some positive vibes across the pond.  :)
What is wrong? Rotator cuff?

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: How about a tri lam build along...
« Reply #134 on: November 20, 2015, 04:16:00 AM »
Thanks guys. The orthopedic Dr doesn't think it's a rotator cuff. She showed me on the xray that the shoulder socket has a very narrow gap on the top where the arm bone fits in the socket,  and it's inflamed. She put a shot of cortisone in 3 weeks ago. That helped for about a week.  Now it's feeling worse. She said if it doesn't get better, then an mri and possible surgery to trim the socket and open up the narrow gap on top. Won't know for sure till she reads the mri.

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: How about a tri lam build along...
« Reply #135 on: November 20, 2015, 06:30:00 AM »
Hope everything works out for ya bud.

Prolly from shooting them heavy 40 lb bows all them years. You better start making em a little lighter... or just get a crossbow.

Offline takefive

  • Trad Bowhunter
  • **
  • Posts: 1098
Re: How about a tri lam build along...
« Reply #136 on: November 20, 2015, 07:33:00 AM »
Hang in there Roy.  Hope they figure out the problem and get you fixed up.  I have pain in my shoulders, too, but it comes and goes.  I think it may be arthritis.  At least I don't worry about the bow when I hear little cracking sounds anymore.  I know it's just the shoulder.
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4254
Re: How about a tri lam build along...
« Reply #137 on: November 20, 2015, 08:21:00 AM »
Wait I have one question now that I think about it. If it only hurts when you bend your elbow and lift how in the heck do you drink that horse pee you call beer? Hmmmmmmm.

Get well soon and I hope it does not have to go to surgery.

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: How about a tri lam build along...
« Reply #138 on: November 20, 2015, 09:22:00 AM »
If it only hurts when you bend your elbow and lift how in the heck do you drink that horse pee you call beer? Hmmmmmmm.


A straw Roy, a straw.....   :laughing:

Get healed up bud!
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline canopyboy

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3106
Re: How about a tri lam build along...
« Reply #139 on: November 20, 2015, 01:54:00 PM »
Get er done Roy!
TGMM Family of the Bow
Professional Bowhunters Society

"The earth has its music for those who will listen." - Santayana

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©