Author Topic: Laminating hot box heat sources..........  (Read 442 times)

Offline LookMomNoSights

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1384
Laminating hot box heat sources..........
« on: November 12, 2015, 10:21:00 AM »
How have you experimented with your hot box heat source?  Who has experimented with different bulbs (heat lamp bulbs, like (2) 175's with a heat deflector shield?) and such with great results.....the box getting up to temp quickly and not getting too hot? Are 4 plain ole hundred watt-ers the best recipe?

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Laminating hot box heat sources..........
« Reply #1 on: November 12, 2015, 10:45:00 AM »
K.I.S.S!  My Bingham box has 4 ceramic light sockets. 4x100w is plenty to max out the 186deg thermostat and I even unscrew 2 sometimes for lower temps, like 90deg-100deg.
 I also added 1/2" foil backed foam board to the inside to help hold the heat.
 I initially got plans for my box when I built a FG long bow(which broke before I braced it) but use it mostly for keeping bow staves dry while working them.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline milehi101

  • Trad Bowhunter
  • **
  • Posts: 133
Re: Laminating hot box heat sources..........
« Reply #2 on: November 12, 2015, 01:28:00 PM »
I use 4 ceramic light sockets with 200 watt bulbs and a dryer thermostat to control the heat.  It heats up fast but shuts off and I can also use it in cooler weather.  Been using this set up for about 15 years and the only thing I have changed is an occasional light bulb.

Offline Jon in North Idaho

  • Trad Bowhunter
  • **
  • Posts: 55
Re: Laminating hot box heat sources..........
« Reply #3 on: November 13, 2015, 12:21:00 PM »
I use heat strips now, but I drew a diagram of the box I came up with which I'll post.  I used 3 porcelain light sockets - one in the middle with a 100 watt bulb, and 2 on the ends which were 75 watts.
For takedown limbs, I used the two 75 watt bulbs only (just un-screw the 100)
  [/url] [/IMG]
Dad to 6 amazing kids!
Psa 127:3-5  Lo, children are an heritage of the LORD: and the fruit of the womb is his reward.  As arrows are in the hand of a mighty man; so are children of the youth. Happy is the man that hath his quiver full of them

Online goobersan

  • Trad Bowhunter
  • **
  • Posts: 1386
Re: Laminating hot box heat sources..........
« Reply #4 on: November 13, 2015, 06:48:00 PM »
I have 4-150 watt bulbs. 2 are constantly on, 2 are controlled by a johnson A419. 1/2" foil backed insulation, circulating fan. I would highly recommend the foil backed insulation. I'm sure smaller bulbs would work fine, just what I had at the time.
Currently conditioning some swill     :goldtooth:  

[/url] [/IMG]

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: Laminating hot box heat sources..........
« Reply #5 on: November 13, 2015, 07:05:00 PM »
Oh Goober-son.. LOL

Three 100 watt bulbs gets this to 160, but I only use a 75 watt to get to 90.


 

Online Carpdaddy

  • Trad Bowhunter
  • **
  • Posts: 806
Re: Laminating hot box heat sources..........
« Reply #6 on: November 13, 2015, 08:22:00 PM »
Four 100 watt bulbs, insulated, and a dimmer switch for when it pegs out the thermostat.
 
Stumpshooting; Slinging sticks with sticks toward the origin of the sticks.

Offline Pago

  • Trad Bowhunter
  • **
  • Posts: 325
Re: Laminating hot box heat sources..........
« Reply #7 on: November 13, 2015, 10:13:00 PM »
The best made plan won't get it made the way you planned.

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Re: Laminating hot box heat sources..........
« Reply #8 on: November 14, 2015, 04:43:00 AM »
My hot box has a 8 bulb capacity. Usually burn 4 100 bulbs. My shop is not heated and when it gets really cold I can crank it up a bit. If I am cooking a few risers I use the wife's oven set a 170 degrees. It works great and she doesn't mind.
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.

Online goobersan

  • Trad Bowhunter
  • **
  • Posts: 1386
Re: Laminating hot box heat sources..........
« Reply #9 on: November 15, 2015, 09:15:00 AM »
If you click on my photo it should redirect to photobucket. There you'll see the ceramic tiles (heat shield) and fan. 101 ways to get the heat you need.     :campfire:

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©