Author Topic: Wood grain Arow Dynamic Traditional (Read 613 times)

Ted Fry · « **on:** March 06, 2008, 06:26:00 PM »

Hey guys and gals , just a heads up we have a special opportunity with a special limited deal .
We purchased a pile of the wood grain Arrow Dynamic shafting , Traditional only. This is not going to be something that we will be able to stock , one time deal only.
We are not on the web site yet with these so you will have to call . Also only a few dozen so don't drag your feet on these

snag · « **Reply #1 on:** March 06, 2008, 06:35:00 PM »

So what is the cost on these? Does A.D. have a picture on their site?

Ted Fry · « **Reply #2 on:** March 06, 2008, 06:45:00 PM »

Cost is $10.00 more than the regular Traditional ADs on our site. AD does not have a picture as they do not make this shaft any longer.
They look like the Vaporwood carbons only in the AD traditional tapered shaft.

dino · « **Reply #3 on:** March 06, 2008, 08:36:00 PM »

Ted
$10 per dozen or per 1/2 dozen?

Lewis Brookshire III · « **Reply #4 on:** March 06, 2008, 08:36:00 PM »

Man I wish they would start making those again. I had some older ones and they looked great! But I shoot the trad lites.

Ted Fry · « **Reply #5 on:** March 06, 2008, 09:29:00 PM »

Sorry guys . $10.00 per 12 . And thats $10.00 more than the standard Traditionals, These wood grain ones look great .
They are going going but not gone yet.

Terry Green · « **Reply #6 on:** March 06, 2008, 09:33:00 PM »

Yep......them's tuffer with the wrap than the the regulars.....and the regulars are TUFF! And, they are 30 grains heavier I believe.

I thought these were long gone......I'll take a dozen Ted if you still got some....just set em back for me...I'll call ya in a bit.

Predator1 · « **Reply #7 on:** March 06, 2008, 09:48:00 PM »

What do these weigh per inch?

Terry Green · « **Reply #8 on:** March 06, 2008, 09:50:00 PM »

Ruffly 560 grains at 29 inches BOP with a 175 grain head.

Predator1 · « **Reply #9 on:** March 06, 2008, 09:55:00 PM »

Terry, I pull 28" on my Howatt Hunter and a 29" shaft is what I like to shoot. Would these spine right for me? Oddly, I currently shoot a 29" shaft with a 175 head but in alum. What do yout think?

Terry Green · « **Reply #10 on:** March 06, 2008, 09:58:00 PM »

What pound @ 28 is the bow?

IB · « **Reply #11 on:** March 06, 2008, 10:02:00 PM »

Ted ...I'll just take Terrys Doz. PLEASE

After he pays ya

Terry Green · « **Reply #12 on:** March 06, 2008, 10:04:00 PM »

Sure thing Vance.....you can have em.....

Put back 2 dozen Ted.

Ted Fry · « **Reply #13 on:** March 06, 2008, 10:07:00 PM »

You got it Vance , any body else want any while Terry,s feeling so Generous ? Charlie, Curtis?

IB · « **Reply #14 on:** March 06, 2008, 10:14:00 PM »

Yikes.....That'll teach me ta be a smart $#@

Predator1 · « **Reply #15 on:** March 06, 2008, 10:49:00 PM »

Sorry Terry, I guess it would of helped to tell you it was 55lb @ 28".

Irish · « **Reply #16 on:** March 07, 2008, 08:28:00 AM »

Ted, have any left? If so, I'll take a dozen.

BigRonHuntAlot · « **Reply #17 on:** March 07, 2008, 08:44:00 AM »

Sent ya a PM.

Terry Green · « **Reply #18 on:** March 07, 2008, 09:47:00 AM »

Yes....they should shoot fine for ya.

Ted Fry · « **Reply #19 on:** March 07, 2008, 12:30:00 PM »

OK guys , I set aside a dozen for every one that spoke up or sent a PM, still some left for those that are just seeing this, there are 300 shafts in all, when their gone thats it .


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Wood grain Arow Dynamic Traditional (Read 613 times)

Users currently browsing this topic: