Author Topic: question about massive end of the limbs  (Read 599 times)

Offline inksoup

  • Trad Bowhunter
  • **
  • Posts: 546
question about massive end of the limbs
« on: March 10, 2016, 07:18:00 AM »
hi friends...

i have question about the massive ends of the limbs.

1. what is it for? what is the purpose of it?
2. my guess is: moving the bending point towards to center... if so is there need to make taper on the limbs?
3. can you please give some commands about pros and cons?

best.
these are not the droids you are looking for.

Offline monterey

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4248
Re: question about massive end of the limbs
« Reply #1 on: March 10, 2016, 07:54:00 PM »
What type of bow are you referring to?

Pictures would help.
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: question about massive end of the limbs
« Reply #2 on: March 10, 2016, 07:59:00 PM »
Pictures will help !
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Robertfishes

  • Trad Bowhunter
  • **
  • Posts: 3490
Re: question about massive end of the limbs
« Reply #3 on: March 10, 2016, 08:17:00 PM »
I think he is asking about "tip wedges" . Inksoup you should find some information thru the search function, type in tip wedge. you can also search for powerlam

Offline inksoup

  • Trad Bowhunter
  • **
  • Posts: 546
Re: question about massive end of the limbs
« Reply #4 on: March 11, 2016, 03:40:00 AM »
hmmm i think it was my mistake.. i had to express myself more clear...

it is not tip wedge or power lam.
i am talking about "siyah" like static ending point. usually they are used in static recurves, self long bows, mollagebeth bows,
like this. if you look at the both tips end there are massive and static ends.

like this.
 https://drive.google.com/file/d/0B3SExYVktZOmaWNLZ1hZT3ByZkU/view?usp=sharing
these are not the droids you are looking for.

Offline monterey

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 4248
Re: question about massive end of the limbs
« Reply #5 on: March 11, 2016, 09:13:00 AM »
I can't answer all of your questions, but the purpose is to make that portion of the limb stiff and non-bending.  So, in that sense, it is a static tip.

I'm not sure why they are so massive in the Asiatic bow.  They do not have to be massive in a modern glass lam bow or in an all wood Holmegard type bow.
Monterey

"I didn't say all that stuff". - Confucius........and Yogi Berra

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: question about massive end of the limbs
« Reply #6 on: March 11, 2016, 09:27:00 AM »
"usually they are used in static recurves, self long bows, mollagebeth bows, "

They are thick Belly to back, but narrow side to side
They are lighter and stronger
 


 
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online KenH

  • Trad Bowhunter
  • **
  • Posts: 1040
Re: question about massive end of the limbs
« Reply #7 on: March 11, 2016, 03:11:00 PM »
Siyahs and static recurves are designed to give the bow extra power in a shorter overall length; even more power than a 'working' recurve, because each siyah/static tip acts as a sort of atlatl to boost the power at the the release.  

As mentioned, siyahs on Asiatic composite bows are thin side-to-side, but thick from back-to-belly because they are designed to work with the powerful wood/horn/sinew composite bow (80-140# draw).  The thin all around, but rigid lever tips of the Mollegabet/Holmegaard selfbows are not intended for nearly that much power.  IIRC the archeological originals are estimated to only be in the 30-60# draw range.
Living Aboard the s/v ManCave

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: question about massive end of the limbs
« Reply #8 on: March 11, 2016, 09:08:00 PM »
Nice Info. KenH
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©