Author Topic: taper sleds (Read 1035 times)

Full Draw Too · « **on:** April 03, 2016, 06:48:00 PM »

Hi Guys
Just wondering where a guy might get aluminum taper sleds? I haven't had luck with these bamboo sleds. they aren't PERFECTLY FLAT and when I run them through my drum sander the tapers that i'm making using these bamboo sleds are not consistently true all the way through. just wondering what you guys use and if anyone has info on how I can get them made out of aluminum and where?
Thanks ahead of time and God Bless

kennym · « **Reply #1 on:** April 03, 2016, 06:55:00 PM »

You might try Kirk at Bigfoot, I bought a set off him. That said, I use bamboo all the time. I like em about 1/4" thick so the pressure roller can push em against the conveyor easily.

One other thing, I sold a sander and bought another bigger one because I was getting .004 to .005 difference in random places on lams. Same results !

Finally figured out it was the splice in the conveyor belt. So I ran the conveyor and very carefully let the sander head down til it started brushing the belt all the way around. Fixed....

The first sander was prob good, just needed the belt dressed! LOL

Bowjunkie · « **Reply #2 on:** April 03, 2016, 07:11:00 PM »

My aluminum sled is hinged so that parallels or any taper I may need is possible. Undoubtedly my best idea to date. I bought the stock, designed it, then had it made at a local machine shop. You could do the same. Call them and tell them what you have in mind.

Bowjunkie · « **Reply #3 on:** April 03, 2016, 07:14:00 PM »

Btw, it's certainly heavier than a sled would be of wood or bamboo, but it doesn't flex and is dead nuts accurate... near as I can tell anyway.

Roy from Pa · « **Reply #4 on:** April 03, 2016, 08:51:00 PM »

Bowjunkie, it didn't happen without pictures. I don't think ya even have a taper sled...

Scott F · « **Reply #5 on:** April 03, 2016, 09:09:00 PM »

Roy, I have to hand it to you - THAT was funny!

(You think it will work? I want to see it too.)

Bowjunkie · « **Reply #6 on:** April 04, 2016, 05:50:00 AM »

Nah, the 'funny' part is, I've posted pictures before, someone copies it, and then claims it was their idea.

Roy from Pa · « **Reply #7 on:** April 04, 2016, 05:54:00 AM »

Nice try, lol.

Buemaker · « **Reply #8 on:** April 04, 2016, 07:33:00 AM »

We want the sled, we want the sled, let's see it Bowjunkie.

Full Draw Too · « **Reply #9 on:** April 04, 2016, 08:21:00 AM »

That would be great if I could see some pics of this hinged alum sled...And it will NEVER be my Idea..I just need help from you guys to conquer this problem.
God Bless

monterey · « **Reply #10 on:** April 04, 2016, 12:27:00 PM »

I cover the whole "idea" thin in one swell foop.

None of them are my ideas!

Bowjunkie · « **Reply #11 on:** April 04, 2016, 03:26:00 PM »

Pago · « **Reply #12 on:** April 04, 2016, 06:50:00 PM »

I'm a believer in credit where credit is due and would like to have one made also.

goobersan · « **Reply #13 on:** April 04, 2016, 09:01:00 PM »

Sounds like a new sponsor's in the works !
"No-junkie Taper Sleds"

Roy from Pa · « **Reply #14 on:** April 06, 2016, 07:04:00 AM »

Well I stopped at Bowjunkies shop last night and snapped a picture of his taper sled. It is narrower at the back so I guess it is tapered. Not sure how well it works but here it is..

Buemaker · « **Reply #15 on:** April 06, 2016, 07:08:00 AM »

So that's why he didn't want to show us.

Scott F · « **Reply #16 on:** April 06, 2016, 07:38:00 AM »

Roy, in case no one has told you in a while -- you have some 'issues'...!

BenBow · « **Reply #17 on:** April 06, 2016, 08:59:00 AM »

Quote

Roy, in case no one has told you in a while -- you have some 'issues'...!

BOY THATS THE TRUTH!!!

fujimo · « **Reply #18 on:** April 06, 2016, 10:19:00 AM »

Full Draw Too · « **Reply #19 on:** April 06, 2016, 01:33:00 PM »

Roy!!! That's what those sleds are used for! TAPPERS!! when we were kids we used them to go down snow covered hills! boy, little did I know that they were all little bowyers back then. LOL

God Bless

News:

Author Topic: taper sleds (Read 1035 times)

Users currently browsing this topic: