Author Topic: Bandsaw  (Read 687 times)

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4254
Bandsaw
« on: April 06, 2016, 07:42:00 AM »
I can get this for about 75 bucks if it is still there. I have been watching it for about a month.

What I don't know is how hard is the decks to get, I did not see any model numbers on this one.

 

So info would be great. I know who makes it but not the size.

Offline Robertfishes

  • Trad Bowhunter
  • **
  • Posts: 3490
Re: Bandsaw
« Reply #1 on: April 06, 2016, 08:21:00 AM »
A new 9" 1/3 hp Grizzly G0803 sells for $190. By the time you buy a table and fence..

Offline Robertfishes

  • Trad Bowhunter
  • **
  • Posts: 3490
Re: Bandsaw
« Reply #2 on: April 06, 2016, 09:03:00 AM »
Kelly, have you checked Craigslist for used Band Saws? There are always 12" Craftsman saws for sale..most are 1/2hp with cool block type guides, but could be a better choice than the bench top Grizzly G1052 that needs parts. My shop has several pieces of equipment I found on Craigslist..

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4254
Re: Bandsaw
« Reply #3 on: April 06, 2016, 10:28:00 AM »
Robertshishes,

I am just asking to see if it would be worth the money. I have 2 bench tops at my house in KS. They don't do me any good here in GA. I seen this one and did not know much about it. Heck I might be able to get it for less I have not really tried. Just asked about it this last weekend.

But do you know the model? so I can look up the part.

thanks,

Kelly

Offline Robertfishes

  • Trad Bowhunter
  • **
  • Posts: 3490
Re: Bandsaw
« Reply #4 on: April 06, 2016, 12:02:00 PM »
it looks like a Grizzly G1052. If they have all the parts from trunion up.. then you might be looking at $80 of parts?

Offline Carson81

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 118
    • Surewood Shafts
Re: Bandsaw
« Reply #5 on: April 06, 2016, 02:48:00 PM »
Where does the table mount on that model? Only trunion mounts on the back?  I am not familiar with benchtop models, but I need to invest in one. changing blades gets old.

Offline scrub-buster

  • Trad Bowhunter
  • **
  • Posts: 1395
Re: Bandsaw
« Reply #6 on: April 07, 2016, 06:56:00 AM »
I would not pay $75 for that saw in that condition with the missing parts.  The bearing rollers look rusty and are probably bad.
AKA Osage Outlaw

Offline Eric Krewson

  • Trad Bowhunter
  • **
  • Posts: 3126
Re: Bandsaw
« Reply #7 on: April 07, 2016, 08:59:00 AM »
I vote NO as well, under powered, too many missing parts and you can get a complete American made older Craftsman 12" for about the same money off Craig's List.

I made about 50 bows on my old 1/2 horse Craftsman. With a sharp 1/2" 3tpi blade it would handle most bow making tasks except for ripping logs.

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4254
Re: Bandsaw
« Reply #8 on: April 07, 2016, 02:42:00 PM »
That's why I love this site. I can pass on it now with out any worries. Ever if it is a grizzy.

Thanks

Offline scrub-buster

  • Trad Bowhunter
  • **
  • Posts: 1395
Re: Bandsaw
« Reply #9 on: April 08, 2016, 12:34:00 PM »
Keep checking craigslist every day.  If you get the app on your phone you can set it to notify you when a new post matches your saved searches.
AKA Osage Outlaw

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4254
Re: Bandsaw
« Reply #10 on: April 08, 2016, 03:39:00 PM »
cool thanks

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©