Author Topic: core tuff question please help  (Read 670 times)

Offline Werewolf

  • Trad Bowhunter
  • **
  • Posts: 46
core tuff question please help
« on: June 05, 2016, 12:27:00 AM »
If i add a layer of core tuff to my limb stack is the amount i can reduce my wood laminations proportional to the thickness of my core tuff or do i need to reduce the amount of wood laminations to a greater extent?
any help would be appreciated

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: core tuff question please help
« Reply #1 on: June 05, 2016, 10:10:00 AM »
I've only used it once, and on an experimental bow. So I have nothing except someone told me it made no extra weight on their bows.
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Wagstaff

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 204
Re: core tuff question please help
« Reply #2 on: June 05, 2016, 02:57:00 PM »
I count the core tuff in the center the same as wood in stack thickness.

Offline Pago

  • Trad Bowhunter
  • **
  • Posts: 325
Re: core tuff question please help
« Reply #3 on: June 06, 2016, 04:53:00 PM »
I follow the same procedure as Pathfinder but use stabil-kore which is similar I am told.
The best made plan won't get it made the way you planned.

Offline bjansen

  • Trad Bowhunter
  • **
  • Posts: 2263
Re: core tuff question please help
« Reply #4 on: June 06, 2016, 06:56:00 PM »
I am with Pago.  I have used core tuff a couple times and I think it adds unneeded weight to the limb. I much prefer the lighter, thinner stable core that kustom king sells. Regardless of what I use, I count it all the same as wood.

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: core tuff question please help
« Reply #5 on: June 06, 2016, 07:29:00 PM »
I think ALL fiberglass adds unneeded weight to the limbs    :laughing:

Offline rockkiller

  • Trad Bowhunter
  • **
  • Posts: 434
Re: core tuff question please help
« Reply #6 on: June 06, 2016, 11:41:00 PM »
Probably a dumb question,but what is the advantage of either one over a wood core ?  :dunno:

Offline Pago

  • Trad Bowhunter
  • **
  • Posts: 325
Re: core tuff question please help
« Reply #7 on: June 07, 2016, 02:34:00 AM »
Granted it was due to a mistake but I have a 1" wide recurve limb that shows no bad stability issues in a 65# bow.  I don't think that is possible with a wood core.  I can't prove it empirically but I believe it adds both torsional and lateral stability.
The best made plan won't get it made the way you planned.

Online jess stuart

  • Trad Bowhunter
  • **
  • Posts: 1722
Re: core tuff question please help
« Reply #8 on: June 07, 2016, 12:39:00 PM »
My understanding is that uniweft helps with stability like stabil core.  Both have strands running running across the length of the glass.  I think coretuff in unidirectional and would have less affect on the limbs stability.  It would probably add only the same amount of stability that a like thickness you usual core material would add.  I must admit I have never used coretuff or stabil core in a limb but, have used uniweft a few times.  In the future I would go will go with stbil core to reduce weight.  I have always figured the uniweft the same as wood with no adjustment to stack height and came out fine.

Offline Werewolf

  • Trad Bowhunter
  • **
  • Posts: 46
Re: core tuff question please help
« Reply #9 on: June 07, 2016, 08:33:00 PM »
ok thank you guys

Offline mwosborn

  • Trad Bowhunter
  • **
  • Posts: 1678
Re: core tuff question please help
« Reply #10 on: June 07, 2016, 10:11:00 PM »
Quote
Originally posted by rockkiller:
Probably a dumb question,but what is the advantage of either one over a wood core ?   :dunno:  
"looks".  You can add a colored stripe down the middle of the limb.
Enjoy the hunt!  - Mitch

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©