Author Topic: Copperhead skins  (Read 598 times)

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Copperhead skins
« on: July 23, 2016, 11:51:00 PM »
Where can I get a pair of copperhead skins?
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Copperhead skins
« Reply #1 on: July 24, 2016, 12:46:00 PM »
Marc, someone on PA this morning said there was a good selection on The big online sale site.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Copperhead skins
« Reply #2 on: July 24, 2016, 04:42:00 PM »
just a couple to bid on
some of them are to high

Thanks pat
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Copperhead skins
« Reply #3 on: July 24, 2016, 07:44:00 PM »
Copperheads are hard to come by. I haven't seen one this year. When I do see them here they are usually only 18" to 20" long.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Mike Yancey

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 1191
Re: Copperhead skins
« Reply #4 on: July 25, 2016, 05:46:00 PM »
Id get them from that big online sale site if it was me. They do so much for Traditional and Primitive Archery.NOT!

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Copperhead skins
« Reply #5 on: July 25, 2016, 06:07:00 PM »
How long are yours Mike?
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Mike Yancey

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 1191
Re: Copperhead skins
« Reply #6 on: July 25, 2016, 06:55:00 PM »
The average is 27'' each I have one pair that is 27 and 29 one that is 30 and 31 several pairs that are in the 27'' range

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: Copperhead skins
« Reply #7 on: July 26, 2016, 07:40:00 PM »
Just from my experience, the skins don't need to be full length of the bow. There's a lot of ways to use the shorter skins. I like to run them from the middle and cut the ends to a point.
"If the women don't find you handsome, they should at least find you handy" Red Green

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: Copperhead skins
« Reply #8 on: July 26, 2016, 08:58:00 PM »
I like black snake skins on the outer limbs too.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©