Author Topic: KennyM D/R bow (Read 2562 times)

Djoseph · « **Reply #40 on:** October 07, 2016, 10:22:00 AM »

Mike thanks for the advice...I did sand of the drip and high spots and lightly sanded and wiped down the rest of the bow and just finished putting on a coat my last one...good, bad or ugly!

Djoseph · « **Reply #41 on:** October 07, 2016, 10:28:00 AM »

Kenny I shot the bow yesterday and after adjusting the brace its now 6.5" it shoots nice and fast and the noise was very less the vibration after the shot was less too....today I put on some fur silencers and its really silent just a dull thump...
I'm very happy with my bow couldn't stop shooting it

Djoseph · « **Reply #42 on:** October 07, 2016, 11:45:00 PM »

Here are the final pics minus the fulldraw pic as I got no one at the moment to take a pic for me!

http://s50.photobucket.com/user/djoseph221176/embed/story

kennym · « **Reply #43 on:** October 08, 2016, 08:07:00 AM »

Dan, I can't see the pic, but I think pbucket hates me.. LOL

Djoseph · « **Reply #44 on:** October 09, 2016, 12:23:00 AM »

Hope this works!!!

Djoseph · « **Reply #45 on:** October 09, 2016, 12:27:00 AM »

Djoseph · « **Reply #46 on:** October 09, 2016, 12:28:00 AM »

Djoseph · « **Reply #47 on:** October 09, 2016, 12:30:00 AM »

Djoseph · « **Reply #48 on:** October 09, 2016, 12:31:00 AM »

kennym · « **Reply #49 on:** October 09, 2016, 08:37:00 AM »

That looks great Dan! I'll bet you get years of enjoyment from it!!

Djoseph · « **Reply #50 on:** October 09, 2016, 10:02:00 AM »

Thanks Kenny I really appreciate all your help and your plan for my successful build....It will be fun to shoot and I plan on making some matching arrows and practicing with it God willing for many years to come....
Best regards,
Dan.

Djoseph · « **Reply #51 on:** October 09, 2016, 11:33:00 AM »

I used a gloss finish on my bow and would like to reduce the shine....any help on how I should go about it would be nice!!
Thanks,
Dan

kennym · « **Reply #52 on:** October 09, 2016, 03:18:00 PM »

You are welcome!

You can buff it with fine steel wool or put some satin finish on if compatible with the finish you have.

Djoseph · « **Reply #53 on:** October 10, 2016, 12:35:00 AM »

Thanks Kenny I'll try that once the coating has fully cured....
Regards,
Dan

Djoseph · « **Reply #54 on:** October 22, 2016, 11:37:00 AM »

Hello Kenny I hope you see this!!! I wanted to ask a question and didn't want to start a new thread...

In your 58/60" bow plan are the tip wedges and power lam necessary or not?

Thanks in advance for your reply...

kennym · « **Reply #55 on:** October 22, 2016, 12:43:00 PM »

The tip wedges and power lam only make the limb bend a bit more mid limb. Helps with string angle and adds a couple fps. Not really necessary and the 58" should go to 28 to 29" DL without.

Djoseph · « **Reply #56 on:** October 22, 2016, 01:34:00 PM »

One more question please!!
The plan does not give any info on the width profile is it the same as 64" plan?
Regards,
Dan

kennym · « **Reply #57 on:** October 22, 2016, 02:19:00 PM »

Yes, can be, but I like to go about 1 3/8" at fades. Personal preference....

Djoseph · « **Reply #58 on:** October 22, 2016, 02:21:00 PM »

Thanks a million Kenny....
You are a gem of a person...
Best regards,
Dan

kennym · « **Reply #59 on:** October 22, 2016, 03:33:00 PM »

I can't wait til Roy gets hold of that! But thank you sir!

News:

Author Topic: KennyM D/R bow (Read 2562 times)

Users currently browsing this topic: