« previous next »
Pages: [1]   Go Down

Author Topic: Ash core....  (Read 1046 times)

Offline mikkekeswick

  • Trad Bowhunter
  • **
  • Posts: 988
Ash core....
« on: November 06, 2016, 02:46:00 AM »


 
 
 
 

I decided to try ash for the core on this bow. Mainly because I live in an area that is very thin on the ground for diffuse porous woods and I had to see if it would work!
5 piece core. Water buffalo sinew and horn. Natural pigments for the paints. Copal varnish.
I've been drawing it to 29 inches and looking at the string angle in the full draw picture it seems like that is about it for drawlength. It is only 45# or so at 29". Performance seems pretty good. I will chrono it soon.
Thanks for looking.
Logged

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20686
Re: Ash core....
« Reply #1 on: November 06, 2016, 05:39:00 AM »
Very nice, Mike.
Logged

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Ash core....
« Reply #2 on: November 06, 2016, 07:33:00 AM »
Nice
I want to see more of this one and the spec.
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: Ash core....
« Reply #3 on: November 06, 2016, 08:03:00 AM »
Looking good for sure.
Logged

Offline KenH

  • Trad Bowhunter
  • **
  • Posts: 1042
Re: Ash core....
« Reply #4 on: November 06, 2016, 09:30:00 AM »
Another beautiful bow Mike.  I've liked Ash as a selfbow wood. Not surprised it make a good composite core.  I love the black/green/gold decorative scheme too.

I see your backyard hunting kit in the background:  Slingshot for rats, deadly stoats, and those vicious vegetable stealing were-rabbits!
Logged
Living Aboard the s/v ManCave

Offline takefive

  • Trad Bowhunter
  • **
  • Posts: 1098
Re: Ash core....
« Reply #5 on: November 06, 2016, 03:20:00 PM »
Wow!  How long is it and how do you get it braced?!  Beautiful work!
Logged
It's hard to make a wooden bow which isn't beautiful, even if it's ugly.
-Tim Baker

Offline mikkekeswick

  • Trad Bowhunter
  • **
  • Posts: 988
Re: Ash core....
« Reply #6 on: November 10, 2016, 03:16:00 AM »
Thanks guys  :)
It is 52 inches ntn. I brace it either with my bracing board/peg board or by the step through method if I don't have the board to hand.
Yes Ken...you've got to watch out for the killer rabbits....!
Logged

Offline die_dunkelheit

  • Trad Bowhunter
  • **
  • Posts: 88
Re: Ash core....
« Reply #7 on: November 10, 2016, 11:09:00 AM »
That's awesome Mike! I've always wanted to build a horsebow using buffalo horn and sinew, and I recently found some on Amazon of all places.

Don't forget the Holy Hand Grenade for those rabbits...
Logged
-Ghost

Offline mikkekeswick

  • Trad Bowhunter
  • **
  • Posts: 988
Re: Ash core....
« Reply #8 on: November 11, 2016, 02:54:00 AM »
And the number of counting shall be THREE...     :)
Logged

Offline BenBow

  • Trad Bowhunter
  • **
  • Posts: 4690
Re: Ash core....
« Reply #9 on: November 11, 2016, 08:45:00 AM »
Very nice and a nice change from the norm here.
Logged
But his bow will remain steady, and his hands will be skillful; because of the hands of the Mighty One of Jacob, because of the Shepherd, the Rock of Israel,  (Genesis 49:24 [NETfree])

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Ash core....
« Reply #10 on: November 11, 2016, 08:46:00 AM »
Beautiful bow Mike. I love the braced and full draw pics. The decorations are pretty nice also. Everything done the way it should be done. Well done.
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Kohlqez

  • Trad Bowhunter
  • **
  • Posts: 21
Re: Ash core....
« Reply #11 on: November 11, 2016, 11:01:00 AM »
Looks great, normally I prefer bows where you can see the wood, but the way you did the sinew and varnish looks great. It has an interesting unstrung profile, did you make the form yourself or use an existing object?
Logged
Illegible squiggly line

Offline frank bullitt

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2428
Re: Ash core....
« Reply #12 on: November 11, 2016, 01:39:00 PM »
Cool bow, Mike!

Ash here is good!

Curious, what is the string length on a 52" with all the reflex?

Love slingshots, too! Again, nice work!
Logged

Offline Dan Landis

  • Trad Bowhunter
  • **
  • Posts: 1145
Re: Ash core....
« Reply #13 on: November 13, 2016, 09:14:00 AM »
Beautiful bow Mike.  Especially like the art work.  Well done Mike!
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©