Author Topic: tip overlays  (Read 744 times)

Offline rockkiller

  • Trad Bowhunter
  • **
  • Posts: 434
tip overlays
« on: February 27, 2017, 11:04:00 AM »
First I want to thank all on this site who help hobby types like me and that being said I have another question.
The few bows I have build have been Kennym designs and I use fast flight strings on them.I have always put a 1/16 piece of phenolic and a piece of whatever wood.
What I was wondering is the phenolic necessary? Or can just a couple pieces of 1/16 hardwood be ok?

Online KenH

  • Trad Bowhunter
  • **
  • Posts: 1042
Re: tip overlays
« Reply #1 on: February 27, 2017, 11:32:00 AM »
Depends on the hardwood -- Fastflight is known to cut into ordinary wooden tips, hence the overlays.  If you overlay with some srious hard woods like Wenge, African Blackwood, Ebony, Snakewood or Lignum Vitae, you should be good with just wood overlays.
Living Aboard the s/v ManCave

Offline rockkiller

  • Trad Bowhunter
  • **
  • Posts: 434
Re: tip overlays
« Reply #2 on: February 27, 2017, 11:46:00 AM »
Was thinking walnut,red elm,maple.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: tip overlays
« Reply #3 on: February 27, 2017, 12:07:00 PM »
I have 2 Dano osage bows, both with FF string and neither with tip overlays. In many cases tip overlays are cosmetic and not necessary.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline macbow

  • Trad Bowhunter
  • **
  • Posts: 2870
Re: tip overlays
« Reply #4 on: February 27, 2017, 01:58:00 PM »
I think any of those would work if you saturatedmthe grain with super glue after cutting in the grooves.
United Bowhunters of Mo
Comptons
PBS
NRA
VET
"A man shares his Buffalo". Ed Pitchkites

  • Guest
Re: tip overlays
« Reply #5 on: February 27, 2017, 02:26:00 PM »
If you wanna be safe glue a .025"  F/G lam on before the wood...

Offline mwosborn

  • Trad Bowhunter
  • **
  • Posts: 1678
Re: tip overlays
« Reply #6 on: February 27, 2017, 05:35:00 PM »
Quote
Originally posted by Pat B:
I have 2 Dano osage bows, both with FF string and neither with tip overlays. In many cases tip overlays are cosmetic and not necessary.
I agree!  With that being said, I do like the looks of various tip overlays.
Enjoy the hunt!  - Mitch

Offline jsweka

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3571
Re: tip overlays
« Reply #7 on: February 27, 2017, 06:59:00 PM »
Quote
Originally posted by mwosborn:
 
Quote
Originally posted by Pat B:
I have 2 Dano osage bows, both with FF string and neither with tip overlays. In many cases tip overlays are cosmetic and not necessary.
I agree!  With that being said, I do like the looks of various tip overlays. [/b]
Want another opinion - I disagree! - LOL!

I had a bow that came to me with FF on it and I had an accidental dry fire due to using an arrow nock that was too large for the skinny string.  On both limb tips, the string cut right through what little overlays it had, through the string grooves, and down into the limb glass.  Bow ruined and lesson learned.  I will NEVER use FF on a bow without reinforced tips. Accidental dry fires can and do occur. Just my experience.
>>>---->TGMM<----<<<<

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: tip overlays
« Reply #8 on: February 27, 2017, 07:18:00 PM »
Better safe than sorry, phenolic is cheap compared to the completed bow.

In John's case, I'll bet the bow was beyond any repair....
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©