Author Topic: SO YA WANNA BUILD A GLASS BOW ?  (Read 13376 times)

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #100 on: March 19, 2017, 06:45:00 PM »
OK, took her out of form today after 24 hours of 70* temp.

Good glue lines, and think I can use the riser cutout for grip one way or another...

 


Took tape off and put new tape on for limb marking.

 

Gotta keep your centerline thru all the cleanup of limbs!!

 

Since this is gonna be a 64" ntn bow, I mark from center both limbs 32" along bow back...

 

Clamp yardstick to limb to hold thru curves and mark 32" from center both ways

 

Now mark center at nock marks and centerline of bow, stretch a string end to end and make sure it goes across center. If not move both marks at nocks the same direction to bring across center mark.

 

Here is how I check at center when the reflex is enough you can't get string close to mark, ....

 
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #101 on: March 19, 2017, 06:50:00 PM »
Now I mark 12" from center , this is where the limb side taper starts...

 

OK I missed a detail, you need to mark 5/16" each way from centerline at nocks, this will give you a 5/8" starting width, I usually end up around a half inch wide at nocks...

Now from that mark, straight line to edge of limb at 12" from center...

 

And now the limbs are marked out....

 

More next weekend, should be shooting it then...

Hope everyone is enjoying seeing how I throw one together!   :D
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline jsweka

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3571
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #102 on: March 19, 2017, 07:17:00 PM »
Great build, Kenny!  Can't wait to see the finished product.

Question - Do you have a clone of yourself working the shop with you?  How else could you have found the time to work on this bow and grind my laminations at the same time?
>>>---->TGMM<----<<<<

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #103 on: March 19, 2017, 07:24:00 PM »
5 more min. you could have it tillered

   :scared:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Bvas

  • Trad Bowhunter
  • **
  • Posts: 2458
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #104 on: March 19, 2017, 08:24:00 PM »
Alright, I gotta ask. How do you cut your hand while laying out limb profile???
I understand that it is almost somewhat of a requirement to bleed on each and every project. But while laying out limbs   :dunno:
Some hunt to survive; some survive to hunt

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #105 on: March 19, 2017, 08:30:00 PM »
Sweet ole boy...

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #106 on: March 19, 2017, 08:52:00 PM »
John, I needed somewhere to be, Renee had a ladies gathering and I wanted to stay out of house.

It may take longer than that Mark!!

Brad, that goes back to the gathering in house, I had the bow form in the vise and one of those nifty stem caps with the end you can take valve cores out with. Went by and raked it across back of hand. Didn't want to bother ladies, so a folded up paper towel and some masking tape til it quit leaking. Had just taken the homemade bandaid off and no cleanup yet! LOL
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #107 on: March 19, 2017, 08:52:00 PM »
Thanks Roy!
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #108 on: March 19, 2017, 08:57:00 PM »
so a folded up paper towel and some masking tape til it quit leaking.

LOL, that's what I use too....

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #109 on: March 19, 2017, 09:22:00 PM »
LOL
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline David Flanrey

  • Trad Bowhunter
  • **
  • Posts: 960
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #110 on: March 20, 2017, 12:13:00 PM »
Looking good Kenny!  I am going to cut back on my glue next time.  You mix up way less than I do.  I sure like the shape of that bow.

Offline rockkiller

  • Trad Bowhunter
  • **
  • Posts: 434
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #111 on: March 20, 2017, 02:16:00 PM »
Quote
Originally posted by David Flanrey:
Looking good Kenny!  I am going to cut back on my glue next time.  You mix up way less than I do.  I sure like the shape of that bow.
Wow,me too.If those are 5oz cups .I have been mixing 1 3/4 of each part for your 62/64 and 58/60 in bows.   :knothead:

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #112 on: March 20, 2017, 04:23:00 PM »
This is the longest glass bow thread I've ever seen. Heck glass bows are like cookie cutters, so I've heard..
    :laughing:

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #113 on: March 20, 2017, 05:04:00 PM »
Heck, I heard glass bows are the longest lasting anyway....  :laughing:
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #114 on: March 20, 2017, 05:04:00 PM »
Heck, I heard glass bows are the longest lasting anyway....  :laughing:
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #115 on: March 20, 2017, 05:06:00 PM »
Quote
Originally posted by kennym:
Heck, I heard glass bows are the longest lasting anyway....   :laughing:  
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #116 on: March 20, 2017, 05:09:00 PM »
Quote
Originally posted by kennym:
Heck, I heard glass bows are the longest lasting anyway....    :laughing:  
:p
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #117 on: March 20, 2017, 05:09:00 PM »
Quote
Originally posted by kennym:
Heck, I heard glass bows are the longest lasting anyway....   :laughing:  
:p
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #118 on: March 20, 2017, 05:37:00 PM »
quote:
Originally posted by kennym:
Heck, I heard glass bows are the longest lasting anyway....     :wavey:

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: SO YA WANNA BUILD A GLASS BOW ?
« Reply #119 on: March 20, 2017, 05:37:00 PM »
quote:
Originally posted by kennym:
Heck, I heard glass bows are the longest lasting anyway....    :bigsmyl:    :archer:

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©