Author Topic: Good Bow Brush  (Read 864 times)

  • Guest
Good Bow Brush
« on: July 19, 2017, 02:30:00 PM »
Well I did it again...  I was brushing off the dust on my bow and the bristles caught a splinter of glass...     :mad:    :mad:    :mad:    :mad:    :mad:    :mad:    :mad:    :mad:
  I know this could happen because it has happened before...  I am always very careful and brush down limb...  But this time I was done brushing and my brush caught after the last stroke when I was just moving it to put it aside...

   Do any of you have any suggestions for a Good Bow Brush that won't catch glass and still remove dust pretty well??

Offline Bvas

  • Trad Bowhunter
  • **
  • Posts: 2458
Re: Good Bow Brush
« Reply #1 on: July 19, 2017, 03:00:00 PM »
I don't use a brush.
I wear the thin nylon gloves with rubber palms while doing shaping and profiling. I just use the gloves to wipe bulk material/dust off. If I want it cleaner and before finishing, I use the air compressor to blow it off. Then right before spraying finish I run a tack rag over the bow.
Some hunt to survive; some survive to hunt

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6074
Re: Good Bow Brush
« Reply #2 on: July 19, 2017, 03:52:00 PM »
What kind of brush? Make sure it is sanded to no splinters to. If you brush go from center to tip.
High on Archery.

  • Guest
Re: Good Bow Brush
« Reply #3 on: July 19, 2017, 08:39:00 PM »
It's a 4" paint brush...  I do brush out from the riser...  But I guess I mucked up...

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©