It's trilam season again

[Roy from Pa]

I don't build hardly any bows in the summer. Too many other things to do. But this is the first glue up of the fall season. I met a guy at the Pine Hill trad shoot this past summer and he seen the bow I donated to the Pine Hill club to be auctioned off. So he asked me about me teaching him how to build his own bow. I seen him a couple other times before this but we never really got to talk much. So I said sure I will help you make a bow! "And because of him, that is how I got that load of Osage logs in my other thread.." So he has been to my shop twice now and the last trip we got it glued up. He lives an hour's drive away so he only comes down once a week. So ya all will have to keep checking back to see how his progress goes.

This is him cutting the Osage, name is Tim.

 

 

 

 

And the riser and tip overlays below.

 

 https://www.youtube.com/watch?v=-bRYE1hPYy0&feature=youtu.be

[Mad Max]

   

[Bowjunkie]

Nice. Will keep an eye on your progress.

[Bowjunkie]

I'd post pics of what I worked on today, but it's not worth the hassle.

[Roy from Pa]

Thanks, Jeff. Actually Imgur.com is sooo much easier and faster than photobucket.
Here is the bow Bowjunkie worked on today. He has been my mentor in bow building for 15 years.. Cause I'm a slow learner... LOL

   

[Bvas]

Looking good Roy

Good luck with that bowjunkie

[Wolftrail]

Tri-Lam looks good, what are the specs on the bow like taper what, taper what have you or whatever. Laminated Wood bows are sure a pain to taper for proper tiller.  For me anyway.
   

[Roy from Pa]

Bow is Osage belly, red elm core lam, boo backed. 62" tip to tip. 1 1/4" wide at flares, tapered to 1/2" wide at tips. I leave the Osage belly 1/4" thick with no taper. The core lam is 3/16th thick at the riser, tapered to 1/6th thick at the tips. Boo is 1/8th thick at riser, tapered to 1/16th at tips. Shooting for 50# @ 26" draw. Won't have any problem reaching that weight.

[Wolftrail]

Thanks for the specs, 50# @ 26".  That would rip my shoulder out. 40-43# is max for me. Dang I hate getting old, if its not my back its my hands, knee etc...etc..
   :(  

Dont know how Howard Hill pulled an 80# bow, even in my prime it would of been a chore.

[Bowjunkie]

Wayne, I tried to reply to you but your mailbox is full. Won't go through. You need to delete some messages bro.

[Bob at Work]

What glue do you use?

[Crooked Stic]

Looking good Roy. That one is gonna rattle you teeth.I remember years ago the Ferret group had one close to that and it would knock your fillings loose. How you liking that Dust Deputy. I have one on a 16 gal. Rigid vac. works good.

[Roy from Pa]

Bob, I use unibond800.

Stic, the snake bow is bowjunkies bow.
I love the dust deputy, it does a super job. Made a huge difference in cutting down on the dust.

[Bob at Work]

thanks!

[Roy from Pa]

Tim was in the shop today. Below is his bow right out of the form. Tim is in the background shaping the riser to fit.

 

Shaping the tip for the overlay.

 

Tip wrapped with rubber bands.

 

Riser glued and clamped.

 

My bow laid out and ready for glue up.

 

And Annie looking for the deer antler box under the bench. She loves chewing antlers.

 

[BMorv]

Hey Roy, how do you taper your bamboo?  
I just try to get mine 1/8" or thinner.  It seems the nodes would get in the way of any efforts to taper properly like you could with lumber.

[Roy from Pa]

First I run it through my drum sander to get it close.
Once the boo is cut to the exact shape of the bow. I taper it on my 4' edge sander, one limb at a time. It's a little hairy and ya gotta watch your fingertips. Then I finish it off with a toothing plane on my work bench.

[Mad Max]

Yea, and slicing your hand open.

[Roy from Pa]

Tim was here yesterday. Cut the bow out, then used a rasp to clean up the sides, rasp in the facets front and back, sanded the bow, then shaped the tip overlays and cut in the string grooves. It's been floor tillered and ready for the tillering tree.

 

 

 

[Mad Max]

Looking good Roy