Author Topic: ILF riser? I'm done (almost) (Read 9664 times)

kennym · « **on:** January 17, 2018, 09:43:00 PM »

May build one, looking for tips!

Thanks,
kenny

monterey · « **Reply #1 on:** January 17, 2018, 10:53:00 PM »

Robertfishes makes those... I think.

NYRON · « **Reply #2 on:** January 18, 2018, 02:52:00 PM »

I'm working on two different designs using CNC...getting close, but don't have anything to show yet.

Robertfishes · « **Reply #3 on:** January 18, 2018, 04:02:00 PM »

Not me, limbs only

kennym · « **Reply #4 on:** January 18, 2018, 04:05:00 PM »

I'm gonna wing it I think, have 2 risers to look at. Wish me luck!

Roy from Pa · « **Reply #5 on:** January 18, 2018, 04:19:00 PM »

The last picture, that little insert in the foreground has screws running in from the outside sides that move it left or right for limb alignment.

That will be your biggest challenge Kenny.

Roy from Pa · « **Reply #6 on:** January 18, 2018, 04:27:00 PM »

OH 4 GOT THE LUCK..

kennym · « **Reply #7 on:** January 18, 2018, 09:42:00 PM »

Thanks Roy, mine is gonna be a wood riser for a friend. He liked the grip on my hunting bow so much he wants an ILF with same grip.

kennym · « **Reply #8 on:** January 18, 2018, 09:44:00 PM »

I think I can rig a router table to do the insert, the lateral adjust screws may be a challenge for sure. The wood riser I have just has them threaded in the wood I think. It's a cheap riser. I will go to the machine shop and see about threaded inserts and set screws.

ron w · « **Reply #9 on:** January 18, 2018, 09:54:00 PM »

Can't wait to see the results.......

Roy from Pa · « **Reply #10 on:** January 19, 2018, 06:37:00 AM »

That should work, Kenny.

Crooked Stic · « **Reply #11 on:** January 19, 2018, 07:16:00 AM »

I dont know if those adapters are still available but the were called donkey plates they had the bolt hole and all. You just had to route a 3/4 slot in the limb pad and screw them in.

Crooked Stic · « **Reply #12 on:** January 19, 2018, 07:26:00 AM »

This may help you.
web page

kennym · « **Reply #13 on:** January 19, 2018, 11:13:00 PM »

Thanks Mike! I had forgotten about that one!

styksnstryngs · « **Reply #14 on:** January 20, 2018, 12:17:00 AM »

One of the few that still has pics. There was a nice one copying the covert hunter riser but with ilf made of cherry.

Crooked Stic · « **Reply #15 on:** January 20, 2018, 05:50:00 AM »

I think Tom Mann on FB made those adapter plates. Dont know if they are still available though.

kennym · « **Reply #16 on:** January 20, 2018, 09:48:00 AM »

I don’t think he does them anymore, thought it was Jim Mann . Used to sell him stuff .

kennym · « **Reply #17 on:** January 26, 2018, 07:29:00 PM »

Well. glued the first glueup today. Got a plan going, got the hardware parts today , all there is left to do , is do it.

styksnstryngs · « **Reply #18 on:** January 26, 2018, 08:15:00 PM »

Build along coming? Please do it.

Roy from Pa · « **Reply #19 on:** January 26, 2018, 08:30:00 PM »

Looking forward to it, Kenny.

News:

Author Topic: ILF riser? I'm done (almost) (Read 9664 times)

Users currently browsing this topic: