INFO: Trad Archery for Bowhunters



Author Topic: 68 lb Beaver  (Read 5039 times)

Offline Jeff Romans

  • Trad Bowhunter
  • **
  • Posts: 106
Re: 68 lb Beaver
« Reply #20 on: June 29, 2010, 02:02:00 PM »
Love the skull.  Congrats.   :thumbsup:
Tight lines and shoot straight

Offline fryar34

  • Trad Bowhunter
  • **
  • Posts: 36
Re: 68 lb Beaver
« Reply #21 on: June 30, 2010, 04:43:00 PM »
Nice beaver!!!!!

Offline Ben Maher

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3759
Re: 68 lb Beaver
« Reply #22 on: July 01, 2010, 09:21:00 PM »
as others have said before , and no I couldn't resist ... Nice Beaver !
" All that is gold does not glitter , not all those who wander are lost "
J.R.R TOLKIEN

Offline ArrowCrester

  • Trad Bowhunter
  • **
  • Posts: 130
Re: 68 lb Beaver
« Reply #23 on: July 01, 2010, 10:55:00 PM »
Looper,

A friend and I hunt out of his boat. We try to get out on the water before low tide ( that usually means getting out around 9 or 10 PM). At low tide the beavers start to swim out of their dens and hunt etc. We hunt out of the boat while trolling. When a beaver is spotted my friend slows down to a coast and steers toward the beaver. The idea is to shoot the animal but NOT kill it right away as they will sink to the bottom of the river if you do. Once hit they head toward their dens on the bank and expire just as they reach land. Then we go and get it and drag it in the boat. Its a gas !!!  Don't need any bowfishing tackle.
Yours In BowHunting,

Bob

Offline ArrowCrester

  • Trad Bowhunter
  • **
  • Posts: 130
Re: 68 lb Beaver
« Reply #24 on: July 01, 2010, 11:10:00 PM »
Pete,

Actually I prepared the skull by first heating water in a pot to near boiling (not quite), then put the skinned out skull in and let it sit for a day or two. Then I take the skull out and clean off the meat that has whithered off the bone. Then dump the old water and do the process again. Pealing of the whithered meat and cartilage. I repeat this till all the flesh is removed and i clean out the brain matter with a wire from the back of the skull opening.

Next I mix Baquacil Porixide with water ( 1 part Bacuacil 2 parts water). I then soak the emersed skull for two or three days.

That's it !!!
Yours In BowHunting,

Bob

Offline ArrowCrester

  • Trad Bowhunter
  • **
  • Posts: 130
Re: 68 lb Beaver
« Reply #25 on: July 01, 2010, 11:21:00 PM »
Divecon,

I call them teeth not tusks. As far as I know they grow continuously. That is why they have to keep gnawing trees to keep them at a reasonable length. Actually you are only seeing the exposed part. The teeth extend into the skull both at the top skull and botton jaw. If I were to pull them out they would curve to about 3 to 5  times what you see in the picture.

The teeth color may very well be from the tanin of the tree bark… not sure though…   :bigsmyl:    :bigsmyl:    :bigsmyl:
Yours In BowHunting,

Bob

Offline The Great Jashu

  • Trad Bowhunter
  • **
  • Posts: 381
Re: 68 lb Beaver
« Reply #26 on: July 02, 2010, 07:04:00 AM »
Its illegal to shoot them here too, we can only trap them. The teeth arent stained, that is just the color of Beaver teeth.
No hunter should feel guilty for killing a deer that doesnt meet someone else's expectations.

Offline Chris Surtees

  • Trad Bowhunter
  • **
  • Posts: 5697
Re: 68 lb Beaver
« Reply #27 on: July 06, 2010, 03:50:00 PM »
:thumbsup:     :thumbsup:

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: 68 lb Beaver
« Reply #28 on: July 06, 2010, 05:36:00 PM »
Dam! That's a big Beev!  :D
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline elkken

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3922
Re: 68 lb Beaver
« Reply #29 on: July 06, 2010, 09:39:00 PM »
Very Nice beaver and a great job on the skull, biggest beaver I have ever seen   :scared:
Sometimes it's better to be lucky than good

TGMM Family of the Bow

Offline zwickeyman

  • Trad Bowhunter
  • **
  • Posts: 234
Re: 68 lb Beaver
« Reply #30 on: July 07, 2010, 03:44:00 PM »
Ken, I know you have seen bigger on that late Mallott hunt:)

Offline Grantumu

  • Trad Bowhunter
  • **
  • Posts: 32
Re: 68 lb Beaver
« Reply #31 on: July 20, 2010, 05:57:00 PM »
They couldn't resist, and ... so couldn't I:what a beautifull fat beaver!!!

Offline Bowshot

  • Trad Bowhunter
  • **
  • Posts: 313
Re: 68 lb Beaver
« Reply #32 on: August 04, 2010, 11:30:00 AM »
One of our guy's in the ATBA organized a beaver shoot in northern Alberta, they shot 3. At our Jamborree on the weekend he was telling the story and stated in front of a whole lot of people that he has never eaten beaver. His wife turned red and started to shrink down a bit. A few comments on not even a nibble? What shape were the pelts in? etc, she left, lots of guys were rolling around with tears in their eyes.
The guys up there are tanning the tails for handle wraps, rests etc, similiar to what Abe Penner has done.

Terry

Offline Lucas K

  • Trad Bowhunter
  • **
  • Posts: 631
Re: 68 lb Beaver
« Reply #33 on: August 04, 2010, 11:56:00 AM »
Very cool. we can't shoot them here in Kansas either, trapping only...
Lucas Kent

Offline ArrowCrester

  • Trad Bowhunter
  • **
  • Posts: 130
Re: 68 lb Beaver
« Reply #34 on: August 27, 2010, 06:10:00 PM »
Thanks for all the nice comments….I am looking forward to the opening of the 2010 season in November…..Getting itchy again!!!!

Thanks everyone!!!
    :wavey:      :wavey:      :wavey:
Yours In BowHunting,

Bob

Offline Gtownviking

  • Trad Bowhunter
  • **
  • Posts: 23
Re: 68 lb Beaver
« Reply #35 on: August 27, 2010, 08:13:00 PM »
Good grief!!  That thing could have taken down a sequoia tree!!

That would qualify for "big game"!

Congrats!
Here, hold my trophy while I kiss your girlfriend.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©