3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: Anyone sources making spruce shafts these days?  (Read 1925 times)

Offline slowbowjoe

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1352
Anyone sources making spruce shafts these days?
« on: June 04, 2018, 06:20:33 PM »
Time for a set or two of new shafts. I might not find any Doug Fir as light as I need for these, so my second choice is spruce.
Any good suppliers right now turning out Sitka Spruce, since Hildebrand has been bowing out?
Logged

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15007
Re: Anyone sources making spruce shafts these days?
« Reply #1 on: June 04, 2018, 09:07:02 PM »
 I got some very nice spruce arrows from True Shaft Archery. I don't have their contact info but you can Google them. Seems they are in Vancouver 
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Hud

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2233
  • 360-921-5779
Re: Anyone sources making spruce shafts these days?
« Reply #2 on: June 05, 2018, 01:51:13 AM »
Logged
TGMM Family of the Bow

Online SuperK

  • Trad Bowhunter
  • **
  • Posts: 902
Re: Anyone sources making spruce shafts these days?
« Reply #3 on: June 05, 2018, 08:31:03 AM »
Raptor Archery
Logged
They exchanged the truth of GOD for a lie,and worshiped and served created things rather than the Creator-who is forever praised.Amen Romans 1:25 NIV

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: Anyone sources making spruce shafts these days?
« Reply #4 on: June 05, 2018, 09:03:53 AM »
Logged
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline ironmike

  • Trad Bowhunter
  • **
  • Posts: 152
Re: Anyone sources making spruce shafts these days?
« Reply #5 on: June 05, 2018, 09:28:52 AM »
wapiti
 archery in oregon
Logged

Offline slowbowjoe

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1352
Re: Anyone sources making spruce shafts these days?
« Reply #6 on: June 06, 2018, 02:02:32 PM »
Thanks for the tips. Trueshaft Archery is a new one to me, I'll have to check them out.
Wasn't sure if Raptor would still have any, thought Ted got them from Hildebrand.
As for Wapiti - I know they make great fir and cedar, never heard they make spruce tough.
Logged

Offline Ari_Bonn

  • Trad Bowhunter
  • **
  • Posts: 323
Re: Anyone sources making spruce shafts these days?
« Reply #7 on: June 06, 2018, 02:10:39 PM »
True shaft is the way to go,  It's all I build my arrows from.    Check out their processes page  nothing but very high quality out of there.    Oh also  the Premium sitka spruce from BC  that 3R sells are from Trueshaft.     


https://www.3riversarchery.com/premium-sitka-spruce-wood-shafts.html     These are from trueshaft   though its says 10 +/-   when he sells them 5+/-   could be a typo.
« Last Edit: June 06, 2018, 06:05:41 PM by Ari_Bonn »
Logged

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15007
Re: Anyone sources making spruce shafts these days?
« Reply #8 on: June 06, 2018, 03:23:32 PM »
...and Wayne(the owner) is a heck of a nice guy.
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: Anyone sources making spruce shafts these days?
« Reply #9 on: June 06, 2018, 05:27:00 PM »
Quote from: slowbowjoe on June 06, 2018, 02:02:32 PM
Thanks for the tips. Trueshaft Archery is a new one to me, I'll have to check them out.
Wasn't sure if Raptor would still have any, thought Ted got them from Hildebrand.
As for Wapiti - I know they make great fir and cedar, never heard they make spruce tough.

About 3 weeks ago I got some 55-60 tapered shafts from Ted (Raptor).
He said he had a lot of the proper spine to start with (65-70?) before the taper job.
Logged
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline Ari_Bonn

  • Trad Bowhunter
  • **
  • Posts: 323
Re: Anyone sources making spruce shafts these days?
« Reply #10 on: June 06, 2018, 06:03:01 PM »
Quote from: Pat B on June 06, 2018, 03:23:32 PM
...and Wayne(the owner) is a heck of a nice guy.

this right here   also takes QC to another level
Logged

Offline Elkchaser

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1117
Re: Anyone sources making spruce shafts these days?
« Reply #11 on: June 06, 2018, 06:28:12 PM »
http://www.trueshaftarchery.com/

This is the link that worked for me. I got a file not found error message on the link above.
Logged
No matter where you go; There you are.......

Toelke Lynx RC 58", 51@28”

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
Re: Anyone sources making spruce shafts these days?
« Reply #12 on: June 06, 2018, 09:51:03 PM »
Raptor also get their Sitka from True Shaft Archery.
Logged

Offline fujimo

  • Trad Bowhunter
  • **
  • Posts: 3619
Re: Anyone sources making spruce shafts these days?
« Reply #13 on: June 07, 2018, 09:28:39 AM »
Zradix, were those a full length taper or just a tail taper?
Logged

Offline Zradix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5798
Re: Anyone sources making spruce shafts these days?
« Reply #14 on: June 07, 2018, 10:22:52 AM »
Quote from: fujimo on June 07, 2018, 09:28:39 AM
Zradix, were those a full length taper or just a tail taper?

Tail taper only.
11/32 to 5/16.

Tapers looked good. Shafts were pretty straight...some needed a little work, but they weren't bad.
The spine seemed pretty consistent as my paper tears were all very similar.
Don't have em all tuned yet...but I think I'll be trimming to very similar lengths.
Logged
If some animals are good at hunting and others are suitable for hunting, then the Gods must clearly smile on hunting.~Aristotle

..there's more fun in hunting with the handicap of the bow than there is in hunting with the sureness of the gun.~ F.Bear

Offline slowbowjoe

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1352
Re: Anyone sources making spruce shafts these days?
« Reply #15 on: June 07, 2018, 07:03:07 PM »
Had no trouble finding True Shaft. I found some fir that fit the bill this time, but I'll definitely give True Shaft a try - I'm impressed by what they have to say about their product, and their ethics.
Logged

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20641
Re: Anyone sources making spruce shafts these days?
« Reply #16 on: June 07, 2018, 08:28:32 PM »
Yup Wayne is a cool guy. He is sending me some shafts soon too..
Logged

Online SuperK

  • Trad Bowhunter
  • **
  • Posts: 902
Re: Anyone sources making spruce shafts these days?
« Reply #17 on: June 07, 2018, 08:33:55 PM »
I bought some of these shafts from Raptor Archery.  Some of the best shafting I have ever seen.  I plan on buying more soon.
Logged
They exchanged the truth of GOD for a lie,and worshiped and served created things rather than the Creator-who is forever praised.Amen Romans 1:25 NIV
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©