Brass Glue in/Glue on Carbon Inserts

[1/4 away]

Does anybody know who carries these inserts for GT trads in 50 gr. ?

[Rock 'N Bow]

Ace makes them in 75gr. Maybe they can file them down to 50gr by request.

[1/4 away]

I have some of the 75 gr.  If I can’t find any 50 gr I may try grinding some down.

[Rough Run]

Kustom King has them for GTs, but don't know the weight.
They are very good about answering questions with a call.

[1/4 away]

Just checked KK website and didn’t see them listed.

[Biathlonman]

I've got 100 and 125 and they are pretty short, I'm not sure a 50 wouldn't be a disaster.

[Rough Run]

1/4 Away, here's a link - listed under broadheads.
http://www.kustomkingarchery.com/Broadhead-Adapter-Glue-In/productinfo/A1093/

[1/4 away]

Thanks.

[Orion]

Yep.  I believe the aluminum glue-in/glue on are near 50 grains.  Don't think brass comes in that light.

[dino]

There are no 50 grainers in those.  Not possible since there would be not enough material left to have any strength. dino

[Orion]

I have some glue in/glue on aluminum adaptors that fit my Easton Axis shafts that weigh 36 grains.   I expect they would be 10-15 grains heavier in an adaptor that would fit a larger 5/16 shaft.