Author Topic: Making a new riser (Read 6915 times)

Lewis Brookshire III · « **on:** June 15, 2018, 10:06:52 PM »

I am starting a new riser for my goto bow. I made that Osage riser and four sets of limbs about 6 years ago. I figured it’s about time I made a new riser for some of the other limbs. We will see how this goes....its my first in quite some time so I am going to go slow. The Osage is 15” but I am going to try a 13” for this new one. Big thanks to KennyM for the Bocote block!

Tapatalk

C. Johnson · « **Reply #1 on:** June 15, 2018, 10:19:18 PM »

Bocote is one of my favorite woods. I think it's gonna look amazing.

kennym · « **Reply #2 on:** June 15, 2018, 10:52:42 PM »

Lookin good!!

styksnstryngs · « **Reply #3 on:** June 16, 2018, 12:15:20 AM »

That Osage darkened so nicely. Can't wait to see the bocote. I like that forward handle design too.

BLOB · « **Reply #4 on:** June 18, 2018, 10:22:57 AM »

What is the length of the new riser?

I really like the design.

Lewis Brookshire III · « **Reply #5 on:** June 18, 2018, 10:24:10 AM »

The new riser will be 13”.

Lewis Brookshire III · « **Reply #6 on:** November 03, 2018, 09:43:29 PM »

Finally getting to work on this one. I have limbs on and will start final shaping the riser soon. Feels good so far. Will be 54” and should end up around 48@28”.

Sent from my iPad using Tapatalk

Wolftrail · « **Reply #7 on:** November 04, 2018, 06:18:48 AM »

That shorty riser looks cute. Can you tell what length the working limb is..? That is from the end of the riser to the string nock.

monterey · « **Reply #8 on:** November 04, 2018, 08:54:31 PM »

I don't want to run the topic into the ditch, but I just gotta ask; Is there a standard limb pad angle for various riser lengths?

Lewis Brookshire III · « **Reply #9 on:** November 04, 2018, 09:08:25 PM »

I have only made a handful of limbs and risers so I am not sure about a “standard” but this one is 23 degrees.

monterey · « **Reply #10 on:** November 04, 2018, 10:00:26 PM »

Thanks.

Lewis Brookshire III · « **Reply #11 on:** November 06, 2018, 10:28:46 PM »

Final shaping is done. Next up will be applying a finish.

Sent from my iPad using Tapatalk

Bvas · « **Reply #12 on:** November 07, 2018, 09:20:16 AM »

Looks mighty fine!!

Good job

Mark R · « **Reply #13 on:** November 07, 2018, 10:47:25 AM »

Good looking riser, it looks great the way it is without finish, should really pop with finish.

Lewis Brookshire III · « **Reply #14 on:** November 24, 2018, 05:51:23 PM »

Finally finished up this bow....it only took 2 years, lol. 54” 3pc Static tip Recurve 48@26”. Solid Bocote riser, limbs are Bamboo cores with Bocote veneers. Osage overlays on the limb butt and tips. Shoots like a dream.

Sent from my iPad using Tapatalk

monterey · « **Reply #15 on:** November 24, 2018, 06:44:48 PM »

That finished up beautifully.

Garman · « **Reply #16 on:** November 24, 2018, 07:16:53 PM »

Very pretty

Bvas · « **Reply #17 on:** November 24, 2018, 10:37:43 PM »

Finish really brought that riser to life. Very nice!!!

Don’t know that I’ve ever seen bocate have such straight grain as the off side of that riser.

kennym · « **Reply #18 on:** November 25, 2018, 12:26:37 PM »

Awesome!! Bocote is such a pretty wood!

Shredd · « **Reply #19 on:** November 25, 2018, 01:42:46 PM »

Wow... Looking Good... Those limbs match nicely also...

News:

Author Topic: Making a new riser (Read 6915 times)

Shredd

Users currently browsing this topic: