Author Topic: Thickness of Belly Wood - when glueing wood to bamboo backing  (Read 5330 times)

Offline outdoors4me

  • Trad Bowhunter
  • **
  • Posts: 36
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #20 on: September 26, 2018, 11:42:57 AM »
Roy,

The bows(staves) that I got from my instructor definitely look straight grained (1/4 sawn). The ones I picked out from my local supplier were flat sawn for sure. He showed me the cathedrals - which you call arrowheads.

Thanks,

Beck

Looking at the belly of the bow, the side facing you when shooting.

1/4 sawn will have long straight growth rings running the length of the limbs.

Flat sawn will look like arrowheads.



Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #21 on: September 26, 2018, 11:54:49 AM »
Ok, that and them not being thick enough are the reason for the lighter weight.

But hey, finish them up and give to a kid to shoot.

Also:
You posted a thumbnail picture, which is fine.

After you select your picture from your PC or phone, just to the right of the little window where the picture name appears, click ( Insert Attachment 1 ). That will make the picture full size in your post.





Offline outdoors4me

  • Trad Bowhunter
  • **
  • Posts: 36
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #22 on: September 26, 2018, 12:17:58 PM »
Ha! Well, I sure to appreciate it!

Thanks.


Ya know there will be a $19.99 fee for all this info, don't ya?

LOL Just kidding..

 :wavey:

Offline outdoors4me

  • Trad Bowhunter
  • **
  • Posts: 36
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #23 on: September 26, 2018, 12:20:46 PM »
Hey guys,

I really appreciate all the info. Losing the access to my instructor really left me scratching my head. After all of your input, I feel I have a good baseline to start over do it right.

Thanks again!

Beck

Offline outdoors4me

  • Trad Bowhunter
  • **
  • Posts: 36
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #24 on: September 26, 2018, 12:21:35 PM »
Great idea to turn them into a kids bow!

Thanks!

Ok, that and them not being thick enough are the reason for the lighter weight.

But hey, finish them up and give to a kid to shoot.

Also:
You posted a thumbnail picture, which is fine.

After you select your picture from your PC or phone, just to the right of the little window where the picture name appears, click ( Insert Attachment 1 ). That will make the picture full size in your post.



Offline BMorv

  • Trad Bowhunter
  • **
  • Posts: 940
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #25 on: September 26, 2018, 12:26:58 PM »
Hmm.  Bamboo looks pretty thick?  Bendy handle bow?  Sorry I assumed you were talking about a typical stiff handled bow.  I can't help you much with dimensions if it's a bendy. 
Life is too short to use marginal bow wood

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #26 on: September 26, 2018, 12:33:25 PM »
WOW, I'll say the boo is thick...

I didn't notice that in the small picture..

Offline outdoors4me

  • Trad Bowhunter
  • **
  • Posts: 36
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #27 on: September 26, 2018, 12:36:52 PM »
I'll have to go back and measure the bamboo, but I know it's supposed(according to instructors specs) to be 1/8".

Thanks, Beck

WOW, I'll say the boo is thick...

I didn't notice that in the small picture..

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #28 on: September 26, 2018, 12:43:50 PM »
I'll have to go back and measure the bamboo, but I know it's supposed(according to instructors specs) to be 1/8".

Yup 1/8th...

Offline Fishinglink

  • Trad Bowhunter
  • **
  • Posts: 326
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #29 on: September 26, 2018, 05:51:37 PM »
Beck, glad to see you made it over here. Looks like you’re getting the answers you needed.


Sent from my iPhone using Tapatalk

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #30 on: September 26, 2018, 05:59:10 PM »
OH?

So you are the one who sicked him on us?

LOL

We will get him headed in the right direction..

Offline Fishinglink

  • Trad Bowhunter
  • **
  • Posts: 326
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #31 on: September 26, 2018, 07:36:20 PM »
He was getting no where on AT so I thought you guys could help him out a bit. It was far above my pay grade.


Sent from my iPhone using Tapatalk

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #32 on: September 26, 2018, 07:47:40 PM »
He is in the right place now..

Offline outdoors4me

  • Trad Bowhunter
  • **
  • Posts: 36
Re: Thickness of Belly Wood - when glueing wood to bamboo backing
« Reply #33 on: September 26, 2018, 09:54:45 PM »
Thanks Fish!

Beck, glad to see you made it over here. Looks like you’re getting the answers you needed.


Sent from my iPhone using Tapatalk

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©