Author Topic: Two piece with True Camo riser (Read 3201 times)

Wolftrail · « **Reply #1 on:** October 10, 2018, 11:25:55 AM »

Wow,

out of the bow of box for sure. Nice job.

Roy from Pa · « **Reply #2 on:** October 10, 2018, 12:28:55 PM »

Awesome...

BMorv · « **Reply #3 on:** October 10, 2018, 12:52:25 PM »

Yeah that's a pretty awesome camo affect. Nice touches on that bow all around

Forwardhandle · « **Reply #4 on:** October 10, 2018, 03:05:10 PM »

Very cool

jess stuart · « **Reply #5 on:** October 10, 2018, 03:16:12 PM »

Very cool. Are you able to grind thin fadeouts or, do you use a power lam? How is the physical weight compared to a wood riser?

Mark Smeltzer · « **Reply #6 on:** October 10, 2018, 03:54:08 PM »

Quote from: jess stuart on October 10, 2018, 03:16:12 PM

Very cool. Are you able to grind thin fadeouts or, do you use a power lam? How is the physical weight compared to a wood riser?

You can grind the fades just as thin as wood. The weight is heavier than most woods. I feel like the "I beam" is necessary whether it's a one or two piece. I know other people have used two pieces of clear glass for the "I beam" but for the take down I went with .250 G10
I did't pour the riser myself. I got it from Saul Trail Archery.

Fishinglink · « **Reply #7 on:** October 10, 2018, 05:22:59 PM »

Man that thing is cool.

Sent from my iPhone using Tapatalk

ty_in_ND · « **Reply #8 on:** October 10, 2018, 05:44:55 PM »

So... Are those real bits of foliage encased in a clear resin?

Crittergetter · « **Reply #9 on:** October 10, 2018, 05:45:47 PM »

Very very nice!! Nice classic clean lines in that bow! Well done sir!!

Mark Smeltzer · « **Reply #10 on:** October 10, 2018, 06:06:42 PM »

Quote from: ty_in_ND on October 10, 2018, 05:44:55 PM

So... Are those real bits of foliage encased in a clear resin?

Yes those are real pine cones, pine needles, leaves....ect.

Thanks for the nice comments!

ty_in_ND · « **Reply #11 on:** October 10, 2018, 06:18:41 PM »

That's awesome! Very unique.

The bow looks really slick as well

Sent from my VS988 using Tapatalk

Crooked Stic · « **Reply #12 on:** October 10, 2018, 07:50:17 PM »

Wow that is a beauty. How much does a block like that cost? is it stronger than normal wood?

Shredd · « **Reply #13 on:** October 10, 2018, 08:18:45 PM »

Daaaamn!! Nice looking bow there Mark... They'll never see yah coming...

Mark Smeltzer · « **Reply #14 on:** October 10, 2018, 08:42:05 PM »

Quote from: Crooked Stic on October 10, 2018, 07:50:17 PM

Wow that is a beauty. How much does a block like that cost? is it stronger than normal wood?

Thank you!
No, I don't think it's not stronger than wood because of the natural material in it but I don't think even a one piece would ever break, the resin is pretty tough. I would use some sort of "I beam" though because of flex. They can make many pretty cool riser blocks, some with stabilized material in them and they are probably more rigid and stronger. This bow is very dead in the hand so I feel as if there is very little flex and the material is heavy.
You would have to ask the guys at Saulk Trail Archery about the price. I know they were working to get the price down and I would hate to quote the wrong price.

BMN · « **Reply #15 on:** October 10, 2018, 09:59:39 PM »

Sweet bow. Well done!

kennym · « **Reply #16 on:** October 10, 2018, 10:08:13 PM »

Nice job Mark!!

C. Johnson · « **Reply #17 on:** October 11, 2018, 09:13:47 AM »

That is something unique. Very impressive!

Chuck The Arrow · « **Reply #18 on:** October 12, 2018, 02:49:32 PM »

Where did you get your material??

Mark Smeltzer · « **Reply #19 on:** October 12, 2018, 04:44:56 PM »

Quote from: Chuck The Arrow on October 12, 2018, 02:49:32 PM

Where did you get your material??

That came from Mike Roberts at Saulk Trail Archery. They can custom pour using dang near anything.

News:

Author Topic: Two piece with True Camo riser (Read 3201 times)

Shredd

Users currently browsing this topic: