Author Topic: .030 Glass Max weight  (Read 1804 times)

Offline Forwardhandle

  • Trad Bowhunter
  • **
  • Posts: 1976
.030 Glass Max weight
« on: October 18, 2018, 02:41:34 PM »
The bow Im currently working on FHLB using .030 glass over stabil-kore and Im shooting for 45 lb ,so Im not worried about over stressing the glass but I was wondering for you guys that have used .030 glass what you think the max durable draw weight can be using it with or with out stabil-kore ?
If you fear failure, you will never try ! But never except it!!

Offline C. Johnson

  • Trad Bowhunter
  • **
  • Posts: 419
Re: .030 Glass Max weight
« Reply #1 on: October 18, 2018, 04:24:41 PM »
Funny you should mention this.....

I use .030" glass for kid's bows and, generally, anything I build under 30 pounds draw.  I just put together my short pattern recurve #3 and I'm thinking this one is going to come in closer to 40#.  I used a strip of Stabilcore in it as well.

I think it will be ok.  There seem to be a lot of competing theories about the percentage of glass in the total stack.  Truthfully, I think longbows are less sensitive than recurves to that percentage.  I think the only bad thing which is likely to happen is that the bow might take a bit of set.  The potential upside is it may be a little faster due to reduced limb mass.

My personal criteria for determining thickness of glass is based on the desired weight.

I use .030" for anything 30# or less.  .040" for 31-50ish pounds, and .050" for anything above that. 

Offline Forwardhandle

  • Trad Bowhunter
  • **
  • Posts: 1976
Re: .030 Glass Max weight
« Reply #2 on: October 19, 2018, 05:05:36 AM »
Thanks Craig I guess I should have ask it this way I'm wondering if when using the stabil-kore directly under clear .030 if it does become a stronger composite for the back and belly where draw weight with in reason would be a non issue ? I'm not worried about the current bow but have a 68 D/R long bow that will probably come in 52-53 lb using the same , I know some times you just have to make the darn thing to find out but just trying to avoid making junk...lol
If you fear failure, you will never try ! But never except it!!

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: .030 Glass Max weight
« Reply #3 on: October 19, 2018, 07:54:32 AM »
I am thinking stable core is woven glass so you should be fine.
High on Archery.

Offline Forwardhandle

  • Trad Bowhunter
  • **
  • Posts: 1976
Re: .030 Glass Max weight
« Reply #4 on: October 19, 2018, 08:41:09 AM »
Ok good should have this one glued up next couple weeks !
If you fear failure, you will never try ! But never except it!!

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: .030 Glass Max weight
« Reply #5 on: October 19, 2018, 09:48:03 AM »
I think where you may get in trouble would be .040 front and .030 belly.
High on Archery.

Offline BMorv

  • Trad Bowhunter
  • **
  • Posts: 940
Re: .030 Glass Max weight
« Reply #6 on: October 19, 2018, 11:54:12 AM »
Ritchie, we are going to have to change your name to "Clearglass"
Life is too short to use marginal bow wood

Offline Forwardhandle

  • Trad Bowhunter
  • **
  • Posts: 1976
Re: .030 Glass Max weight
« Reply #7 on: October 19, 2018, 03:30:07 PM »
Lol I like unstabil-kore better 😊
If you fear failure, you will never try ! But never except it!!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©