Author Topic: 2019 what did ya do today.... (Read 196693 times)

Flem · « **Reply #1740 on:** October 15, 2019, 12:52:08 PM »

Shredd you got all the cool tools!

monterey · « **Reply #1741 on:** October 15, 2019, 04:11:12 PM »

Quote from: oldfartfarmer on October 15, 2019, 02:45:14 AM

Monterey,
I like that riser
what wood did you use?

That's the bow I'm copying. It's a vintage Damon Howatt Monterey that suffered a split limb tip. It's just in the picture to compare to the template made to copy the bow.

I don't know what the wood is.

Shredd · « **Reply #1742 on:** October 15, 2019, 09:20:51 PM »

Flem... Cool tools don't count if you are screwing up... It's the end of the day... I am tired and hungry... I am gonna cut these lams to size while there is light and then glue them up after dinner... After cutting my hyper lams I noticed that one lam was flipped the other way... After lots and lots of choice words I got to thinking... I really did not feel like making another set of lams... I was lucky enough that I had a little over a 1/4" to spare... So I super glued the butt of one lam back on reinforced it with some paper and trimmed to size... Disaster averted...

Flem · « **Reply #1743 on:** October 15, 2019, 10:11:37 PM »

Got to feed the most important tool. Only way it's going to stay sharp

Crooked Stic · « **Reply #1744 on:** October 16, 2019, 06:11:33 AM »

Hmmm never thought of paper cores before

Roy from Pa · « **Reply #1745 on:** October 16, 2019, 06:45:01 AM »

Mike, those are high tech lams:)

Crooked Stic · « **Reply #1746 on:** October 16, 2019, 11:13:18 AM »

Yes paper is less mass.lol

Sent from my LM-X410.F using Tapatalk

Shredd · « **Reply #1747 on:** October 16, 2019, 12:00:39 PM »

That part gets cut off... I just needed the full length for glue-up... But I have actually made paper tip wedges before...

oldfartfarmer · « **Reply #1748 on:** October 16, 2019, 02:18:47 PM »

Went crazy with my drum sander today,
I think the Nor-Easter that headed our way messed my thinking up a wee bit

poor limb pads ended up at 3.5 long,,for some dang reason I had a mark there
and DU ,,, sanded right up to the mark,,,glue is my friend,,,repeat,, glue is my friend,
,
Now Ive got to mess around with that dang pesky-EVIL-Black-Palm
and fix the mess I've made,
I need a nap,

later all
cheers
John
,

Mad Max · « **Reply #1749 on:** October 16, 2019, 06:29:28 PM »

Quote from: oldfartfarmer on October 16, 2019, 02:18:47 PM

Went crazy with my drum sander today,
I think the Nor-Easter that headed our way messed my thinking up a wee bit
poor limb pads ended up at 3.5 long,,for some dang reason I had a mark there
and DU ,,, sanded right up to the mark,,,glue is my friend,,,repeat,, glue is my friend,
,
Now Ive got to mess around with that dang pesky-EVIL-Black-Palm
and fix the mess I've made,
I need a nap,

later all
cheers
John
,

Did you cut the paper template for the riser from the plans kennym sent you?
Looks kind of thin back to belly

Crooked Stic · « **Reply #1750 on:** October 16, 2019, 06:36:42 PM »

Well Shredd. Paper is wood in a different form.

Roy from Pa · « **Reply #1751 on:** October 17, 2019, 07:09:50 AM »

Ya know somepin Crooked-sticky, paper airplanes fly fast too:)

Crooked Stic · « **Reply #1752 on:** October 17, 2019, 07:42:18 AM »

oldfartfarmer · « **Reply #1753 on:** October 17, 2019, 10:32:10 AM »

wanted a drum sander, but I'm too cheap to buy one,
and the one i have on my drill press is a small cheap one, don't like it,
so,
spent the morning making a Jig, for my 4" belt and disk sander,
I now have a 1/2 drum sander all plum and square wood i used is laminated maple shelving I had laying around,
so its nice and flat, drilled a bunch of holes where the motor sits on the shelving, so it gets air flow
,
cheers
John
,

Shredd · « **Reply #1754 on:** October 17, 2019, 02:18:21 PM »

Nice Mod... Ditch that motor and put a real motor on there... That one might work for sanding your nails though...

Flem · « **Reply #1755 on:** October 17, 2019, 05:03:39 PM »

I can't figure out how that's going to function as a drum sander? Looks like a belt sander on edge.
You are not the only cheap one here!

Shredd, congratulations! 1000 posts

You just beat me to it.

oldfartfarmer · « **Reply #1756 on:** October 17, 2019, 05:05:27 PM »

sanded and worked with my Black-EVIL-Palm
made a BIG ooOPS and even with my notes i messed up
got lucky and had enough room to reverse the pattern, my last long chunk of black palm,, so I got real lucky it fit reversed
,
cheers,
John

,

oldfartfarmer · « **Reply #1757 on:** October 17, 2019, 05:06:55 PM »

Quote from: Flem on October 17, 2019, 05:03:39 PM

I can't figure out how that's going to function as a drum sander? Looks like a belt sander on edge.
You are not the only cheap one here!

Shredd, congratulations! 1000 posts You just beat me to it.

IM only using it to sand out my curves, probably wrong name,,should have used spindle sander ?
see my last post,

Roy from Pa · « **Reply #1758 on:** October 17, 2019, 05:08:53 PM »

Yinz's 2 birds would have a lot more than 1,000 posts ifin I did have ta clean up some of them:)

Forwardhandle · « **Reply #1759 on:** October 17, 2019, 05:19:27 PM »

I like the car jack adjustment post on your gizmo sander Flem

News:

Author Topic: 2019 what did ya do today.... (Read 196693 times)

Shredd

Shredd

Shredd

Users currently browsing this topic: