Author Topic: 2019 what did ya do today.... (Read 196204 times)

Wolftrail · « **Reply #200 on:** January 25, 2019, 04:06:08 PM »

Bvas sorry to see about that miss. Nice animal.

Crooked Stic · « **Reply #201 on:** January 25, 2019, 04:36:18 PM »

Been working on this KTBA Tyler Roberts bow. Bacote veneers and blue stable maple with a little ambrosia burl. Came out 41@28 62 in. ready for top coats.

Roy from Pa · « **Reply #202 on:** January 25, 2019, 05:26:16 PM »

Sweet..

skeaterbait · « **Reply #203 on:** January 25, 2019, 05:44:51 PM »

I glued up a one piece that I have been tinkering with, it's the virgin run for a new form I made. The dry run looked pretty good except for one spot, but some shims took care of that. It's too bad I focused so hard on that area that I didn't see the gap on back of the bow. There was no light shining on the dry run so I am in hopes when I shave this down to 1.25" that gap will go away.

Crooked Stic · « **Reply #204 on:** January 25, 2019, 10:13:50 PM »

If that is full of glue it will just look ugly but proly be ok.

Fishinglink · « **Reply #205 on:** January 26, 2019, 07:16:13 AM »

Heading to the Kalamazoo expo in a couple hours. Getting some supplies for bow swap and hope to find a bow for my daughter. Will be a good bonding day for us. Hope everyone survives the polar vortex this week.

Sent from my iPhone using Tapatalk

Roy from Pa · « **Reply #206 on:** January 26, 2019, 08:09:33 AM »

Have fun, Cody.

I gotta cut and split some more wood today for the wood burner:)

Don't like the -2 forecast, but it will prolly be a lot colder than that up your way..

skeaterbait · « **Reply #207 on:** January 26, 2019, 08:43:33 AM »

I woke up this morning to a deflated air hose in the form, I guess I will have to check my plugs. The good news is, in spite of my screw ups and the air hose, with narrowing the bow to 1.25" (which is my target anyway) the glue lines went from total humiliation to just an embarrassment.

No matter, the bow is really just a test of the form anyway and so far I am please with it. I am going to re-do the riser plan for future, which may change the form over to topless, not sure on that yet.

Roy from Pa · « **Reply #208 on:** January 26, 2019, 08:59:58 AM »

Doesn't look bad, Lonnie.

kennym · « **Reply #209 on:** January 26, 2019, 09:07:42 AM »

"I gotta cut and split some more wood today for the wood burner:)"

So you're workin on a bow today?

Roy from Pa · « **Reply #210 on:** January 26, 2019, 09:16:05 AM »

Ya know somepin McKenzie, Ya better hope I don't get your name in the bow swap...

Just bought some pink paint yesterday, just incase I do:)

skeaterbait · « **Reply #211 on:** January 26, 2019, 09:24:29 AM »

Quote from: kennym on January 26, 2019, 09:07:42 AM

"I gotta cut and split some more wood today for the wood burner:)"

So you're workin on a bow today?

skeaterbait · « **Reply #212 on:** January 26, 2019, 09:25:05 AM »

Quote from: Roy from Pa on January 26, 2019, 08:59:58 AM

Doesn't look bad, Lonnie.

Thank you sir.

Bvas · « **Reply #213 on:** January 26, 2019, 09:26:06 AM »

Quote from: kennym on January 26, 2019, 09:07:42 AM

"I gotta cut and split some more wood today for the wood burner:)"

So you're workin on a bow today?

Roy from Pa · « **Reply #214 on:** January 26, 2019, 10:16:34 AM »

Yunzs are all smarty pants today..

kennym · « **Reply #215 on:** January 26, 2019, 10:36:55 AM »

Never pass a chance!!

skeaterbait · « **Reply #216 on:** January 26, 2019, 10:56:11 AM »

I thought it was never pass a bathroom?

kennym · « **Reply #217 on:** January 26, 2019, 11:00:01 AM »

That's considered a chance!

goobersan · « **Reply #218 on:** January 26, 2019, 11:02:41 AM »

I'm sure both are true but Roy wouldn't dare tee-up for another shot like that

Roy from Pa · « **Reply #219 on:** January 26, 2019, 01:18:01 PM »

News:

Author Topic: 2019 what did ya do today.... (Read 196204 times)

Users currently browsing this topic: