Author Topic: 2019 what did ya do today.... (Read 196261 times)

skeaterbait · « **Reply #180 on:** January 23, 2019, 05:09:14 PM »

While waiting for some epoxy to set and some finish to dry I was looking for something to keep me from having to clean up my area and it hit me, I built a draw board to make a DFC, so let's do it for another bow. This one is the KennyM design that I built. With the new bow scale I found out it's actually pulling 3 lbs more than I originally thought. Man do I feel strong now

I stopped at 31" when I noticed the arrow (on there for a safety catch) was about to fall off the back side of the shelf.

Shredd · « **Reply #181 on:** January 23, 2019, 05:21:54 PM »

Now I know where to get some free rock salt... Wait I live in Florida... We only need sun tan lotion...

Glad you guys are alright...

Roy You better quit picking on my Sander Or I will have to come up there and send one of your bows through it and make sawdust out of it...

Yeah Kenny... Them clamps were a deal at about $3 a piece...

Skeats... What is the brace height on that bow??? If it is about 7 " You should get a reading at 9" of draw for your DFC... It would show more of the bottom end of the curve...

kennym · « **Reply #182 on:** January 23, 2019, 05:24:06 PM »

Looks good Lonnie! Which design?

skeaterbait · « **Reply #183 on:** January 23, 2019, 05:38:03 PM »

The 62" original. I wish I had done the modified but I didn't know any better.

Brace is about 6-3/4" if I recall correctly.

Forwardhandle · « **Reply #184 on:** January 23, 2019, 05:49:14 PM »

Flem You will be more motivated with the heat makes it much easier I have 2 , 220v barn heaters in my shop usually work in a T shirt in winter ! Lonnie you been busy lately ,Shreedy I know where you can get all you want bring a shovel

BMN · « **Reply #185 on:** January 24, 2019, 01:29:02 PM »

chased a ring on an osage stave I've had laying around the shop.

Wolftrail · « **Reply #186 on:** January 24, 2019, 01:46:02 PM »

Thats sweet I wish I Had that laying around my shop.

Pat B · « **Reply #187 on:** January 24, 2019, 01:47:47 PM »

Looks like a fun project. Nice stave with nice rings and plenty of character. Looking forward to your progress.

Roy from Pa · « **Reply #188 on:** January 24, 2019, 02:46:33 PM »

Awesome stave...

Buemaker · « **Reply #189 on:** January 24, 2019, 05:46:17 PM »

Nice rings an stave.

Bvas · « **Reply #190 on:** January 24, 2019, 07:13:37 PM »

I shot under a monster eight point

Roy from Pa · « **Reply #191 on:** January 24, 2019, 07:16:15 PM »

Ah crap, sorry dude.

skeaterbait · « **Reply #192 on:** January 24, 2019, 09:26:38 PM »

If that's him he is a good'n.

kennym · « **Reply #193 on:** January 24, 2019, 09:38:09 PM »

Dang it!!

Bvas · « **Reply #194 on:** January 24, 2019, 09:52:16 PM »

Quote from: skeaterbait on January 24, 2019, 09:26:38 PM

If that's him he is a good'n.

Yea. That’s him. I believe he is 6.5 or 7.5 years old. Has tremendous mass.

Flem · « **Reply #195 on:** January 25, 2019, 10:19:21 AM »

Thats one nice looking 4 point, regionally speaking of course.

kennym · « **Reply #196 on:** January 25, 2019, 12:55:13 PM »

Put underlays on the hooker , hoping to keep some string control without cutting too deep a groove in the glass. Tapered them .001 per inch with the thick end toward tips. .070 at thick end , then feathered the other end last 1/2" or so.

If you draw by hand, it is hard to not torque the limbs when letting down. Still haven't shot her, but checked weight at 43. 34 @ 28"

Crooked Stic · « **Reply #197 on:** January 25, 2019, 01:31:23 PM »

Starting to sound like it may benefit from a longer riser.

kennym · « **Reply #198 on:** January 25, 2019, 01:38:26 PM »

I like that part but I think the hooks need reshaped or something . I’m just gonna send it to pa maybe

Roy from Pa · « **Reply #199 on:** January 25, 2019, 02:10:29 PM »

Send it, always wanted to grind on a glass bow:)

News:

Author Topic: 2019 what did ya do today.... (Read 196261 times)

Shredd

Users currently browsing this topic: