3pc td longbow stack height?

[styksnstryngs]

Hey guys, I'm building a fairly curvy three piece hybrid. 15" riser, 60-62" ntn. Tips will be about an inch ahead of the front of the riser. What's a baseline or a range for stack height with 1?5" wide .040 bearpaw clear glass if I'm shooting for anything between 42 and 50 pounds? I'd rather go a bit heavy with this, especially since I can trap down weight. I also think I'm gonna keep the taper rate down to  .001" and add a tip wedge but have a pyramid limb.

[Crittergetter]

What’s your wedge length?

[Crooked Stic]

On my 16 in. riser 12 degree fade with 7 3/8s wedge 62 in. it takes .348 for 42@28 with .oo4 limb taper. looks like this

[kennym]

16" riser, 8" wedge, .003 total taper, 4 wood ,2 glass 64" bow,.320  makes 48@ 28"

[Crooked Stic]

So looking at my and Kennys design will tell that you it takes different stuff for each design So kinda do SWAG on the first one and go off that.

[styksnstryngs]

Kenny, that's with Gordon glass, right? I'm thinking that with cherry lams at a .002" taper with bearpaw glass, .340 should get me in a good ballpark.

[kennym]

.002 taper may produce a slightly heavier bow.  My SWAG would be .330 for 50# on a 64"

[kennym]

Correction! I looked again and it is .325 for 50@28

[styksnstryngs]

Alright, I'll probably end up with a .320 with bearpaw glass and cherry core and cross my fingers.