Author Topic: Started a trade bow... (Read 12858 times)

kennym · « **Reply #60 on:** January 21, 2019, 12:39:19 PM »

Quote from: kennym on January 21, 2019, 12:38:03 PM

With the big hooks and the superlam it put a lot of stress in midlimb cause the hooks weren't giving much. Unsure right now whether to make one with just a 001 taper instead of superlam or rebuild the form....

The string came off when it blew or caused it to ,not sure which...

Bvas · « **Reply #61 on:** January 21, 2019, 12:43:05 PM »

Sounds like the trade bows are off with a BANG

kennym · « **Reply #62 on:** January 21, 2019, 12:47:36 PM »

Yep, and I got Roys name!!

Just kiddin, I don't have a name yet I guess?...

Forwardhandle · « **Reply #63 on:** January 21, 2019, 12:59:22 PM »

Oops

monterey · « **Reply #64 on:** January 21, 2019, 01:13:10 PM »

That's a huge dissapointment. I feel your pain and am glad it's not physical pain!

Could you use more thickness taper and get some of the pressure off the fade areas? How long were the tip wedges?

kennym · « **Reply #65 on:** January 21, 2019, 01:29:15 PM »

Yep, no harm except to the bow. The tip wedges would figure to 5" but I'm afraid if I go with more taper and still have the superlam in with wedges it will just make it weaker in the area just before tip wedge starts.

So still studying the form shape...

Mark R · « **Reply #66 on:** January 21, 2019, 01:35:43 PM »

I got to say Ken the form design did'nt look extreme, without over thinking witch you have already done,like said it might have been the string got twisted off the nocks when it blew.

Hope you get it figured out looked like a nice design

kennym · « **Reply #67 on:** January 21, 2019, 01:44:47 PM »

Thinkin stabilcore and no wedges so the midlimb isn’t worked so extremely . Still pondering ...

Roy from Pa · « **Reply #68 on:** January 21, 2019, 01:58:55 PM »

Ouch, sorry bud.

Glad ya didn't get hert...

Is the little mouse ok?

kennym · « **Reply #69 on:** January 21, 2019, 02:16:08 PM »

Ain’t seen him since . May have taken some shrapnel from

Roy from Pa · « **Reply #70 on:** January 21, 2019, 02:32:02 PM »

Didn't happen wifout pichers:)

Buemaker · « **Reply #71 on:** January 21, 2019, 03:47:22 PM »

Scary stuff. Very strange and seldom that a glass bow blows like that.

kennym · « **Reply #72 on:** January 21, 2019, 05:20:50 PM »

Yep Bue , it was a shocker! I have the riser saved (very carefully and worked well) and new lams and glass laid out… Glue another one tomorrow.

Went without the superlam, just a .001 taper. and cut the stack to .265 Looking at Mike's version of it, I'd like the tips to open up a little more...

Crooked Stic · « **Reply #73 on:** January 21, 2019, 05:33:34 PM »

I could be wrong. But I really dont think those hooks are your problem. This is about the same thing with the superlam. and has maybe 200 arrows thru it so far. What was your core wood? It just has a vibration I have not had time to figure out yet.

kennym · « **Reply #74 on:** January 21, 2019, 05:36:52 PM »

The tip seemed really stiff on the limb that didn’t go. I’m not sure the hooks are it either but gonna try a plain .001 to see if they open up a bit.

Core was aboo and I wondered about it too, if maybe red elm or maple would be better ...

monterey · « **Reply #75 on:** January 21, 2019, 06:36:41 PM »

All three are well proven. I'm doubting it was the cores. OTOH, maple and elm have very long term track records. I'm learning a lot at your expense that's for sure.

Crooked Stic · « **Reply #76 on:** January 21, 2019, 07:46:35 PM »

Every bow I have built for several years has had Aboo in it. It is all not created equal. Lots of top names use it also.

kennym · « **Reply #77 on:** January 21, 2019, 07:54:44 PM »

I have had no failures with aboo, and it failed in the straighter part of limb so I don't think that is it either...

monterey · « **Reply #78 on:** January 22, 2019, 12:20:25 AM »

You're kinda in a spot as far as variables go. Probably shouldn't change too many at once. I've done that one before! Problem solved. Wonder what the problem was??? 8-)

kennym · « **Reply #79 on:** January 22, 2019, 09:07:52 AM »

Yep Mike, if you change 2 things, you only have a 50% chance of thinking you know what the prob was...

News:

Author Topic: Started a trade bow... (Read 12858 times)

Users currently browsing this topic: