Author Topic: 2019 Bow Swap Thread (Read 204148 times)

goobersan · « **Reply #360 on:** February 12, 2019, 09:12:39 PM »

Yew ?? I'll be watching that one.

Never seizes to amaze me how you guys don't use glass

4 point · « **Reply #361 on:** February 12, 2019, 09:17:09 PM »

Good look'n risers wood carver!

Bvas · « **Reply #362 on:** February 12, 2019, 09:18:19 PM »

Quote from: Roy from Pa on February 12, 2019, 08:45:57 PM

Quote
Never had a yew bow

Well make yourself one!

Send me some yew

Roy from Pa · « **Reply #363 on:** February 12, 2019, 09:19:18 PM »

Come and get it:)

Bvas · « **Reply #364 on:** February 12, 2019, 09:20:55 PM »

Does it come with instructions

4 point · « **Reply #365 on:** February 12, 2019, 09:22:53 PM »

I think I need to lengthen my sight window a bit so my overlay looks more even. Other than that she's ready for final sanding and finish.

Roy from Pa · « **Reply #366 on:** February 12, 2019, 09:31:32 PM »

Maybe on structions:)

I dunno Travis, maybe so, maybe not.

Flem · « **Reply #367 on:** February 12, 2019, 09:41:58 PM »

Is there a prize for first one done? Or last?

canopyboy · « **Reply #368 on:** February 12, 2019, 09:49:23 PM »

Quote from: lignaphile on February 12, 2019, 09:41:58 PM

Is there a prize for first one done? Or last?

Just bragging rights and whatever the opposite is.

And Trav, wow!

4 point · « **Reply #369 on:** February 12, 2019, 10:03:37 PM »

It's to cold and snowy here to do anything else. I have a lot of sanding left plus filling all that Wenge grain.

BMorv · « **Reply #370 on:** February 12, 2019, 10:05:36 PM »

That’s sweet Travis, you over achiever you.

Here’s the dust collection Roy.

Crooked Stic · « **Reply #371 on:** February 12, 2019, 10:49:29 PM »

So that dust is an all Dust Deputy unit. Is that two horse motor. And blowing the air outside. What did it set you back?
Lonnie I am betting you can drill the heads off that bolt and maybe heat it slow and a good pair of vise grips may move it. If not saw it flush and drill it like Roy said. If you get the limb off you can always build another riser.

BMorv · « **Reply #372 on:** February 12, 2019, 11:42:32 PM »

It’s the popular harbor freight 2hp bag type dust collector. I only used the blower and motor from it. That connects to the dust deputy which I mounted to an old feeder barrel. Exhauste outside. The heavy dust falls from the cyclone to the barrel and the fine harmful particles are exhausted outside.
$170 for the DC w/ 20% off coupon and the cyclone was like $180. Lol. Paid more for the plastic dust deputy.

Buemaker · « **Reply #373 on:** February 13, 2019, 02:30:18 AM »

Skeat, that is too bad. When gluing up something I always tell myself to double check, but still I mess up sometimes. My latest was getting saran wrap between the glass and wood.

Nice looking risers David and Yew is always nice.
4 point, almost finished, looking great.

Buemaker · « **Reply #374 on:** February 13, 2019, 05:14:29 AM »

Time to drill holes, yak I don’t like it. I am putting brass bushings in limb holes. Fingers crossed.

Roy from Pa · « **Reply #375 on:** February 13, 2019, 06:10:48 AM »

Bue, that is so so very sharp.

Ben, not sure how well that works?

I bought one of those blower assy's and it didn't do hardly anything for me.

They supposedly are for "moving air/fine dust" like you have it setup for though.

It did nothing when connected to my tools.

But with my shop vac connected to the dust deputy, 99.99% goes into the dust deputy and practically "nothing" goes into the shop vac.

skeaterbait · « **Reply #376 on:** February 13, 2019, 08:01:44 AM »

Travis you are a genius, I knew heat would do it but it never crossed my mind to use a conduit to avoid direct heat to the bolt. Thank you.

Plan A lives.....

kennym · « **Reply #377 on:** February 13, 2019, 08:30:39 AM »

Nice save Lonnie and Travis!!

But that is sharp!

I still got nuthin, busy as a one armed paper hanger!

Roy from Pa · « **Reply #378 on:** February 13, 2019, 08:45:28 AM »

Good job, Lonnie..

Glad ya saved it.

Crooked Stic · « **Reply #379 on:** February 13, 2019, 09:02:49 AM »

Not seeing what you done with the conduit?

News:

Author Topic: 2019 Bow Swap Thread (Read 204148 times)

Users currently browsing this topic: