Author Topic: 2019 Bow Swap Thread (Read 204600 times)

wood carver 2 · « **Reply #980 on:** March 09, 2019, 06:06:24 PM »

Another beautiful bow. Absolutely awesome work coming out of the bow shops this year. Dave.

4 point · « **Reply #981 on:** March 09, 2019, 08:23:46 PM »

Here ya go. Finally got a picture taker around in the daylight, they wouldn't come out in the blizzard to take the pic. Wish it would warm up so I could shoot outside.

Roy from Pa · « **Reply #982 on:** March 09, 2019, 08:28:08 PM »

4 point · « **Reply #983 on:** March 09, 2019, 08:35:52 PM »

Great pic's Dave and thanks for the positive words about the bow. It's only 56 pounds at my draw length so it gains 2 pounds per inch from 28 to 31. Think I'll have to build myself one.

Bvas · « **Reply #984 on:** March 09, 2019, 08:48:55 PM »

Nice work all around fellas!!!

canopyboy · « **Reply #985 on:** March 09, 2019, 08:50:17 PM »

Quote from: 4 point on March 09, 2019, 08:35:52 PM

Great pic's Dave and thanks for the positive words about the bow. It's only 56 pounds at my draw length so it gains 2 pounds per inch from 28 to 31. Think I'll have to build myself one.

I highly recommmend it.

Crooked Stic · « **Reply #986 on:** March 09, 2019, 10:33:33 PM »

Travis that is bending good.

Crooked Stic · « **Reply #987 on:** March 09, 2019, 10:39:44 PM »

Brad that may be 3 pieces of glass on the tips cant remember. have to look at tomorrow.

goobersan · « **Reply #988 on:** March 09, 2019, 11:44:50 PM »

Way to go men

BMorv · « **Reply #989 on:** March 10, 2019, 09:39:16 AM »

Sweet bows Lonnie and Travis.

The bar has been set really high.

Flem · « **Reply #990 on:** March 10, 2019, 10:40:02 AM »

Another score! Thanks for waiting to get your full draw shot in whiteout conditions Travis, really highlights the profile

Forwardhandle · « **Reply #991 on:** March 10, 2019, 12:01:37 PM »

Awsome looking bows Fella's

Bvas · « **Reply #992 on:** March 10, 2019, 07:48:36 PM »

Managed to sneak a little time with the swap bow today. Was warm enough that I got the profiling done on the limbs. With that done, I figured I could remove the tape and sneak a peak at the limbs. Nothin fancy, but I think the edge grain walnut looks just fine. Now I gotta figure out what I’m doing for overlays.

Flem · « **Reply #993 on:** March 10, 2019, 07:58:22 PM »

Looks good! Got to love good old american black walnut.

Roy from Pa · « **Reply #994 on:** March 10, 2019, 08:01:02 PM »

Nice, Brad.

kennym · « **Reply #995 on:** March 10, 2019, 09:21:04 PM »

Sweet bows showing up, I'm gaining on my 3 ...

goobersan · « **Reply #996 on:** March 10, 2019, 09:27:23 PM »

Lookin great Brad

kennym · « **Reply #997 on:** March 11, 2019, 10:03:28 AM »

I was really liking the looks of this one, til I heard the tic

I think I made the tenon too small...

So I put it on the shooter and dry fired it at my victims draw length, didn’t blow but it ain’t going ...

Back under my rock now...

Sent from my iPhone using Tapatalk

BMorv · « **Reply #998 on:** March 11, 2019, 10:36:31 AM »

Man, Kenny, that bow was something special.....Sorry about that.
You don't think you can sand it down and re-wrap that whole area with glass? I don't know, just would hate to lose that bow without trying something.

Crooked Stic · « **Reply #999 on:** March 11, 2019, 11:16:05 AM »

I had one like that the wrap cured on the out side but was still soft on the inside. Not sure why it cured that way. Anyhow I got some new epoxy. Cleaned that area back off and rewrapped. turned out good. So yeah I would try to grind that off and redo it.

News:

Author Topic: 2019 Bow Swap Thread (Read 204600 times)

Users currently browsing this topic: