Author Topic: Limb wedges (Read 3352 times)

skeaterbait · « **on:** January 31, 2019, 09:25:27 AM »

I have noticed that with limb wedges some people put them with the taper slanting towards to the belly, while some slant to the back of the bow. Does it really make a difference other than aesthetics?

Crooked Stic · « **Reply #1 on:** January 31, 2019, 11:04:20 AM »

They look cooler with the slant on the belly and you get a simdgen more preload.

Wolftrail · « **Reply #2 on:** January 31, 2019, 11:09:38 AM »

Quote from: Crooked Stic on January 31, 2019, 11:04:20 AM

They look cooler with the slant on the belly and you get a simdgen more preload.

Always wondered-about that Stic. Cheers

skeaterbait · « **Reply #3 on:** January 31, 2019, 12:14:46 PM »

Thanks Mike.

Bvas · « **Reply #4 on:** January 31, 2019, 12:49:54 PM »

I'm confused (I know.....no surprise)
How do you change which way it slants?
Where its placed in stack?

Pics would help

kennym · « **Reply #5 on:** January 31, 2019, 12:59:15 PM »

Brad, turn it over...

But you have to make the flat on it long as your limb pad at least then...

Roy from Pa · « **Reply #6 on:** January 31, 2019, 01:05:54 PM »

Man I hope bvas didn't get my name in the swap..

skeaterbait · « **Reply #7 on:** January 31, 2019, 01:09:26 PM »

You can never find good pics when you need them.....

Bvas · « **Reply #8 on:** January 31, 2019, 01:19:09 PM »

Quote from: kennym on January 31, 2019, 12:59:15 PM

Brad, turn it over...

But you have to make the flat on it long as your limb pad at least then...

Lonnie the pic was enough to break my brain lock. lol

I was thinking of it as a full wedge. Forgot about the flat portion of the wedge

Bvas · « **Reply #9 on:** January 31, 2019, 01:22:50 PM »

Quote from: Roy from Pa on January 31, 2019, 01:05:54 PM

Man I hope bvas didn't get my name in the swap..

I'll just box up a bunch of scraps and send to ya and claim lightning got it

Roy from Pa · « **Reply #10 on:** January 31, 2019, 01:23:36 PM »

Crooked Stic · « **Reply #11 on:** January 31, 2019, 03:34:17 PM »

The pics explained it. Termed inverted wedge.

Buemaker · « **Reply #12 on:** February 01, 2019, 09:08:14 AM »

One use a convex form and the other a concave form.

skeaterbait · « **Reply #13 on:** February 01, 2019, 09:17:27 AM »

Quote from: Buemaker on February 01, 2019, 09:08:14 AM

One use a convex form and the other a concave form.

Thank you for that tid-bit Bue, it made me stop and think this through a bit. If one were to invert the wedges the form itself would need to be altered as well, right?

Buemaker · « **Reply #14 on:** February 01, 2019, 09:24:34 AM »

Yes. Would be more difficult to make a concave form to fit such a wedge as you mention. A convex one is easier, many use that.

Crooked Stic · « **Reply #15 on:** February 01, 2019, 10:27:07 AM »

Put the flat part of the limb against the form. And the belly part up under the hose so it will bend around the slant of your wedge. The bottom of the limb here will be below the hose. And the top on the form face.

jess stuart · « **Reply #16 on:** February 02, 2019, 10:11:23 AM »

I use that type wedge in all my takedowns and do it just like Mike. The back of my limb goes down on the form and the belly up.

Crittergetter · « **Reply #17 on:** February 02, 2019, 02:19:32 PM »

I do mine the opposite way simply because I like the way the overlay flows into the transition. Creates a more seamless transition imo

Sent from my iPhone using Tapatalk

Roy from Pa · « **Reply #18 on:** February 02, 2019, 02:28:51 PM »

I agree....

Crooked Stic · « **Reply #19 on:** February 03, 2019, 02:13:18 AM »

Me to

News:

Author Topic: Limb wedges (Read 3352 times)

Users currently browsing this topic: