Author Topic: Camo cloth under clear glass on limbs?? (Read 7075 times)

longrifle · « **on:** February 08, 2019, 06:41:04 PM »

I know a few bowyers have done this, anyone on here know the process? I would assume you would have to soak the cloth in smooth on??

goobersan · « **Reply #1 on:** February 08, 2019, 08:09:00 PM »

Sounds interesting. I'd like to see how that looks under glass

kennym · « **Reply #2 on:** February 08, 2019, 08:37:23 PM »

Check out Sarrels Archery on FB , he just did a zebra job and may have used cloth ...

Crooked Stic · « **Reply #3 on:** February 08, 2019, 10:42:53 PM »

Got to be sure your cloth is totally saturated a roller may be a good tool for that.

monterey · « **Reply #4 on:** February 09, 2019, 12:46:19 AM »

Wonder how that plays into stack and draw weight?

skeaterbait · « **Reply #5 on:** February 09, 2019, 05:55:09 AM »

I am captivated, who's gonna be the first to try this out?

Roy from Pa · « **Reply #6 on:** February 09, 2019, 06:24:01 AM »

Bet ole Kenny is cutting up his old camo skivvies now to try it:)

skeaterbait · « **Reply #7 on:** February 09, 2019, 08:33:29 AM »

Take downs are good for experiments, that way you don't have to remake a whole new bow after a failure.

skeaterbait · « **Reply #8 on:** February 09, 2019, 08:35:36 AM »

I wonder how paper would do for a veneer. It should be thin enough to soak up plenty of epoxy and I would think have virtually no affect on stack thickness (depending on the paper used)

skeaterbait · « **Reply #9 on:** February 09, 2019, 08:38:30 AM »

It even comes in pink.

Flem · « **Reply #10 on:** February 09, 2019, 09:06:54 AM »

Most fabric is going to be too thick. Printed rice paper is what you see in skis, surfboards, skateboards, etc.

Crooked Stic · « **Reply #11 on:** February 09, 2019, 09:14:13 AM »

I remember years ago Assenheimer had a patriotic bow with a blue riser that had american flag material under clear glass that he said was from Wal mart. Thinner would be better.

goobersan · « **Reply #12 on:** February 09, 2019, 10:37:44 AM »

slightly compressed this stuff is .015" and I think its a cotton/poly blend

kennym · « **Reply #13 on:** February 09, 2019, 10:46:25 AM »

Paul Schafer made them waaay back ..

And camo skivvies would be waaay better’n brown Roy ! Just sayin ...

Bvas · « **Reply #14 on:** February 09, 2019, 10:50:42 AM »

Someone did a kids bow on here a few years back. I think they used leopard print cloth.

Bvas · « **Reply #15 on:** February 09, 2019, 11:34:56 AM »

http://www.tradgang.com/tgsmf/index.php?topic=145339.0

longrifle · « **Reply #16 on:** February 09, 2019, 03:02:49 PM »

Thanks guys for the input, I’m sure if I really get the cloth soaked in smooth on I should be fine. Sort of like making a thin linen micarta lam with camo cloth. I’ll be sure to post pics, it might be one of those FHLB like Kenny makes.

Shredd · « **Reply #17 on:** February 09, 2019, 08:07:42 PM »

The Hunter epoxy may be better suited for this because it is thinner than smooth on... It will saturate the cloth fibers better... I would definitely cut the cloth at least an 1/4" bigger than the lams... At least in the riser area and a 1/3 the way up the limb... The rest of the limb will be cut back to the profile taper any way...
Lay out some butcher paper, put your fabric on top and work your resin in good with a squeegee... When done it may have a better bond between glass and core than just resin alone... You can make some really cool bows using printed fabric...

Last note... I like using cotton... I don't know if it makes a difference but I feel the the resin will saturate the fibers better than a man made fiber...

Shredd · « **Reply #18 on:** February 09, 2019, 08:21:00 PM »

Here is one I did when I started making bows...

Roy from Pa · « **Reply #19 on:** February 09, 2019, 08:26:39 PM »

That's nice, Rich.

News:

Author Topic: Camo cloth under clear glass on limbs?? (Read 7075 times)

Shredd

Shredd

Users currently browsing this topic: