Author Topic: Turkey medicine (Read 8557 times)

Shredd · « **Reply #20 on:** February 10, 2019, 03:02:30 PM »

Shweeeet.!!! Did you use a stringer (I beam)??? I have some old unfinshed bows and was thinking of making a 2pc out of one of them but they don't have a stringer... Taking so much wood off without a stringer kinda scares me...

kennym · « **Reply #21 on:** February 10, 2019, 03:29:06 PM »

Yep 1/4” phenolic back to belly thru site window.

Also wrapped handle with auto body glass cloth. Not sure that’s an approved material but seems good so far ...

Just didn’t wanna order a bunch of stuff

Crooked Stic · « **Reply #22 on:** February 10, 2019, 04:02:08 PM »

Kenny you sneaky devil you. That looks good. The auto resin may set quicker but just s strong probably. And most guys put carbon tape in there 1 layer after the first wrap of glass.

Yeah make Roy a FHLBP could be a two piece nen he gots parts to play with

Bvas · « **Reply #23 on:** February 10, 2019, 04:36:22 PM »

Purty slick there Kenny

kennym · « **Reply #24 on:** February 10, 2019, 05:16:24 PM »

Yep, be sure to put the black layer in. I got pretty thin on the bottom edge of the glass wrap because I didn't. Thought I had the grip as wanted but took it a little deep on bow back. It works fine but looks weak. The pressure there is on the top of the socket so it is good. But bothers me that I did it!! LOL

kennym · « **Reply #25 on:** February 10, 2019, 05:17:38 PM »

Oh, I don't like doing leather wraps so I masked it off and sprayed the grip with bedliner…

Shredd · « **Reply #26 on:** February 10, 2019, 05:44:11 PM »

You don't need carbon fiber... Glass is plenty strong as long as you wrap it good enough... I would think as long as you have a heavy 3/16" and thicker wrap on there you should be good to go...

kennym · « **Reply #27 on:** February 10, 2019, 06:31:06 PM »

The only thing I woulda had the black for was to tell when I was shaping deep enuff!!

kennym · « **Reply #28 on:** February 10, 2019, 06:32:08 PM »

And I agree the glass is plenty stout, I may dye the resin on a layer on next one

Crooked Stic · « **Reply #29 on:** February 10, 2019, 07:54:52 PM »

Carbon gives me piece of mind. I try never to under build. Yeah I did on with bed liner. You can get the thin rubber sleeves from Black Widow. Or bicycle inner tubes.

goobersan · « **Reply #30 on:** February 10, 2019, 07:55:35 PM »

really like that one
GREAT JOB !!

Shredd · « **Reply #31 on:** February 10, 2019, 08:02:39 PM »

Quote from: kennym on February 10, 2019, 06:32:08 PM

And I agree the glass is plenty stout, I may dye the resin on a layer on next one

It will kinda work... It will just kinda mix and fade in with the resin that is already on there and the next layer or two that you are gonna put on... It will sorta work but will be vague... The only way that will work well is if you let the wraps on there harden then wrap it with pigmented resin and let that harden and then do your final wraps...

Just take a thin strip of colored cotton fabric and wrap it around the grip one one layer thick...

kennym · « **Reply #32 on:** February 10, 2019, 08:03:40 PM »

Quote from: Shredd on February 10, 2019, 08:02:39 PM

No... Don't do that... It will just kinda mix and fade in with the resin that is already on there and the next layer or two that you are gonna put on... It will sorta work but will be vague... The only way that will work well is if you let the wraps on there harden then wrap it with pigmented resin and let that harden and then do your final wraps...

Just take a thin strip of colored cotton fabric and wrap it around the grip one one layer thick...

That would work!

Shredd · « **Reply #33 on:** February 10, 2019, 08:06:16 PM »

Kenny... I changed my post a little...

longrifle · « **Reply #34 on:** February 13, 2019, 08:56:30 PM »

Where did you get all your TD socket sleeve supplies from?

kennym · « **Reply #35 on:** February 13, 2019, 10:04:51 PM »

I just used fender repair glass fabric and resin from wallyworld on this one.

longrifle · « **Reply #36 on:** February 14, 2019, 06:27:54 AM »

What about the release agent??

Crooked Stic · « **Reply #37 on:** February 14, 2019, 06:41:12 AM »

Big Jim has it.
https://www.fibreglast.com/product/Woven_Fiberglass_Tape_217/Fiberglass_Fabric
Release agent 3-4 coats of Johnsons paste wax after you seal the tenon with several coats of CA glue. I have found if you get a good tight fit putting on finish after may get the tenon too tight.

Roy from Pa · « **Reply #38 on:** February 14, 2019, 06:46:36 AM »

Ya shoulda used black magic patch repair:)

BMorv · « **Reply #39 on:** February 14, 2019, 09:43:40 AM »

Nice work Kenny. That looks slick.

There's an article in Primitive Archer which shows how to make a takedown with automotive glass fabric like you used and standard 2 ton epoxy. They recommend 1/8" thick wrap for 50 lbs and below and 3/16" thick above 50 lbs.

This is with wood selfbows so I'd imagine what most of the fiberglass guys are doing with carbon and ibeams is overbuilding. But that's a good thing with bows. Just food for thought.

News:

Author Topic: Turkey medicine (Read 8557 times)

Shredd

Shredd

Shredd

Shredd

Users currently browsing this topic: