3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Acadian Woods Pass Around - Sign in info pg 2  (Read 7965 times)

Offline Tim Mullins

  • Trad Bowhunter
  • **
  • Posts: 120
Acadian Woods Pass Around - Sign in info pg 2
« on: April 12, 2019, 11:04:52 AM »
Hi Folks
Acadian Woods Custom Bows is interested in Starting bow pass around.
Please tell us how it works.
Thanks
Tim And Sean :-)
Acadian Woods Bows

Offline mec lineman

  • Trad Bowhunter
  • **
  • Posts: 957
Re: Acadian Woods Custom Bows
« Reply #1 on: April 12, 2019, 11:49:03 AM »
oh my!! Tim usually the bowyer will get an idea about what # and bow length folks are the most interested in. I am sure ANY bow out of your shop will fit the bill.
"Pick a spot,now aim 6" lower!"                        
Caribow taiga ex
Tall Tines Stickflinger
Yellowstone Halfbreed

P.B.S  member

Offline Terry Green

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 28715
Re: Acadian Woods Custom Bows
« Reply #2 on: April 12, 2019, 12:53:34 PM »
I'M IN!!!

 Just start a list right here on  Tradgang.....

 And get folks to email you their address.... What you run the list for a few weeks ( Or however long you want it to be)send the bow and the list in the order of recipients....

 That's the way we used to do the Saint Jude hope and faith bows.

55@30  Will cover most people..... With no stacking.
Tradbowhunting Video Store - https://digitalstore.tradgang.com/

Tradgang Bowhunting Merchandise - https://tradgang.creator-spring.com/?

Tradgang DVD - https://www.tradgang.com/tgstore/index.html

"It's important,  when going after a goal, to never lose sight of the integrity of the journey" - Andy Garcia

'An anchor point is not a destination, its  an evolution to conclusion'

Offline Tedd

  • Trad Bowhunter
  • **
  • Posts: 1620
Re: Acadian Woods Custom Bows
« Reply #3 on: April 12, 2019, 01:06:55 PM »
I'm in.
What bow are you thinking Tim? I always liked that recurve Warren Womack uses.
Tedd

Offline Terry Green

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 28715
Re: Acadian Woods Custom Bows
« Reply #4 on: April 12, 2019, 01:18:33 PM »
Tedd.. I was hoping for a tree stick after what you told me a few years ago. :jumper: :jumper: :jumper:

 Of course either is fine with me.  :thumbsup:
Tradbowhunting Video Store - https://digitalstore.tradgang.com/

Tradgang Bowhunting Merchandise - https://tradgang.creator-spring.com/?

Tradgang DVD - https://www.tradgang.com/tgstore/index.html

"It's important,  when going after a goal, to never lose sight of the integrity of the journey" - Andy Garcia

'An anchor point is not a destination, its  an evolution to conclusion'

Offline M Harbison

  • Trad Bowhunter
  • **
  • Posts: 6
Re: Acadian Woods Custom Bows
« Reply #5 on: April 12, 2019, 02:45:15 PM »
Tim, of course I am in . . . TD Treestick, and I think 45-50 lbs. @ 28 would fit most . . .

Have a Blessed day!
Michael

Offline Crittergetter

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 2634
Re: Acadian Woods Custom Bows
« Reply #6 on: April 12, 2019, 03:14:09 PM »
Tim, it’s a really good way to get your bow in peoples hands that may be interested. It’s also a good way to get some feedback. It has been a good decision for us too as it has led to multiple orders from potential customers!

Heck I’d love the chance to fondle one of your bows myself!  :biglaugh:

When you do a sign up I want in if that’s ok!?!?
An elitist mentality creates discord, even among the elite!
"I went jackalope hunting but all I saw was does!"
Luck is when preparedness meets opportunity, I just need more opportunities!

Offline mec lineman

  • Trad Bowhunter
  • **
  • Posts: 957
Re: Acadian Woods Custom Bows
« Reply #7 on: April 12, 2019, 03:30:30 PM »
Please consider me for a chance to try your bow. thanks for sponsoring this place I tend to call home.
"Pick a spot,now aim 6" lower!"                        
Caribow taiga ex
Tall Tines Stickflinger
Yellowstone Halfbreed

P.B.S  member

Offline Yooper-traveler

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 673
Re: Acadian Woods Custom Bows
« Reply #8 on: April 12, 2019, 06:02:56 PM »
Definitely in!!
Klaatu, Verata, Nicto

Online bigjohnmissalot

  • Trad Bowhunter
  • **
  • Posts: 75
Re: Acadian Woods Custom Bows
« Reply #9 on: April 12, 2019, 06:16:26 PM »
Definitely  :bigsmyl:

Offline blacktailbob

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 592
    • Island Graphics Inc.
Re: Acadian Woods Custom Bows
« Reply #10 on: April 12, 2019, 07:22:25 PM »
Never seen a pass around for lefties.

Isn't that discrimination?  :dunno:
[email protected]

Islandgraphicsfl.com

Online mjh

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 680
Re: Acadian Woods Custom Bows
« Reply #11 on: April 12, 2019, 08:06:42 PM »
Wow, that would be a generous offer....I'd be in.....

Truth be told Tim I was in your shop years ago when my folks lived in Slidell --about 94-95 Christmas time (dad retired and they move the year before Katrina--I haven't been that way in long long while) ........was just getting started in traditional archery and didn't know much......you were kind enough to have me at your shop and share some time with a new guy.....

We don't see your bows way up North very much....would be nice to try one out and show it around a bit a the local club...

Offline bucknut

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 913
Re: Acadian Woods Custom Bows
« Reply #12 on: April 12, 2019, 08:46:17 PM »
I would be up for a try too.  Most pass arounds I have seen have been in the 50 @28 or there about range.
I've heard good things about your bows, just never had the chance to fondle one.
Whom virtue unites death cannot separate.

Online joe vt

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1179
Re: Acadian Woods Custom Bows
« Reply #13 on: April 13, 2019, 05:12:48 AM »
I would love to be part this pass around.
~ joe vt  >>>~~~~~~~~>

TGMM Family of the Bow

Offline Tedd

  • Trad Bowhunter
  • **
  • Posts: 1620
Re: Acadian Woods Custom Bows
« Reply #14 on: April 13, 2019, 08:04:31 AM »
That tree-stick killed deer! The cut on the shelf always seemed like a great idea. Like a dummy I sold it one day when I went all recurve and ordered a pair of Black Widows. Now all I have a longbows again. I wish I had the tree-stick and the BWs! I'll never sell another bow.
I should have more photos of that bow somewhere. Here is the tip of an Acadian Woods Tree-stick in this photo.


Offline Archie

  • Trad Bowhunter
  • **
  • Posts: 1795
Re: Acadian Woods Custom Bows Pass Around
« Reply #15 on: April 13, 2019, 12:53:47 PM »
I would like to be included. 

-Roman
Life is a whole lot easier when you just plow around the stump.

2006  64" Black Widow PMA
2009  66" Black Widow PLX
2023  56" Cascade Archery Whitetail Hawk
2023  52" Cascade Archery Golden Hawk Magnum

Online M60gunner

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3026
Re: Acadian Woods Custom Bows Pass Around
« Reply #16 on: April 13, 2019, 03:50:05 PM »
I would like to try a 3 piece LB. But I would like to be included no matter what bow you choose. Thank you for an opportunity to try your bow. TomM

Offline smokin feathers

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 430
Re: Acadian Woods Custom Bows Pass Around
« Reply #17 on: April 13, 2019, 08:06:50 PM »
Id like a chance to try one of your bows as well
Smoke

TGMM-FAMILY OF THE BOW

Offline Tim Mullins

  • Trad Bowhunter
  • **
  • Posts: 120
Re: Acadian Woods Custom Bows Pass Around
« Reply #18 on: April 14, 2019, 10:44:36 AM »
Thinking about a 3 Pc. Carbon X T Tree Stick .
64" 45ish @ 28" @ 2#`s per inch to 32+"
Tim :-)

Offline SactoBowman

  • Trad Bowhunter
  • **
  • Posts: 120
Re: Acadian Woods Custom Bows Pass Around
« Reply #19 on: April 14, 2019, 10:50:24 AM »
Thinking about a 3 Pc. Carbon X T Tree Stick .
64" 45ish @ 28" @ 2#`s per inch to 32+"
Tim :-)

I would definitely like to try that!

Thank you!

Users currently browsing this topic:

0 Members and 4 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©