Author Topic: FHLB Plans (Read 4755 times)

kennym · « **on:** May 07, 2019, 12:27:28 PM »

Finally done and available!

Have had a lot of interest in these and now have them completed. Several revisions and changes later! LOL

Please remind me if you have asked for these. Also have templates for router use .

[email protected]

Thanks!
Kenny

Sorry this one is wrinkled, had to take to truck and look over . Sure nuff one more change order!

Sent from my iPhone using Tapatalk

goobersan · « **Reply #1 on:** May 07, 2019, 05:31:44 PM »

longrifle · « **Reply #2 on:** May 07, 2019, 09:24:23 PM »

Kenny how can I get a set of those plans?

kennym · « **Reply #3 on:** May 07, 2019, 09:27:51 PM »

Just email me your addy at the address above and I’ll let you know the total with shipping .

Thanks,
Kenny

longrifle · « **Reply #4 on:** May 07, 2019, 10:19:56 PM »

hunting badger · « **Reply #5 on:** May 07, 2019, 10:49:40 PM »

I've been waiting for this!!

Crooked Stic · « **Reply #6 on:** May 08, 2019, 05:45:57 AM »

Kenny I see you got the belly against the form . I think that is much easier to get a good fit and let the hose form around the hump.

kennym · « **Reply #7 on:** May 08, 2019, 08:32:18 AM »

Yep Mike,that was a revision . Good idea too, thanks!

hunting badger · « **Reply #8 on:** May 09, 2019, 08:00:24 PM »

Kenny what lengths can the bow be made in?

kennym · « **Reply #9 on:** May 09, 2019, 08:44:54 PM »

62 up to 66” ... so far

Bob Eddy May have done a 68”?

hunting badger · « **Reply #10 on:** May 10, 2019, 10:10:07 PM »

Thanks Kenny, I thought they were going to be for shorter bows.

bigbob2 · « **Reply #11 on:** May 11, 2019, 01:54:23 AM »

sorry, no Kenny. Only did a 68'' on the deflex/reflex.The only one of these I made was the one I posted where it deconstructed in a big way and it was 60''. the glass looked like it had been cut strait across the limb from side to side. still don't really know what happened. I am starting Mark 2 now., weather has been rank humidity sky high.Having had about 150 shots out of it before it went to that big woodpile in the sky, it was without doubt the most impressive bow I have shot.Keen to get this second one done.

kennym · « **Reply #12 on:** May 11, 2019, 08:28:31 AM »

Hey sorry Ken and Bob, I was on the wrong thread , I was talking about the TD! The FHLB has enough reflex that the string will be on the limb much past 60" and it may get touchy to shoot.…

Roy from Pa · « **Reply #13 on:** May 11, 2019, 09:16:01 AM »

Ah, a senior moment I take it?

LOL

kennym · « **Reply #14 on:** May 11, 2019, 10:35:15 AM »

Musta been, I figured you could relate !

Buemaker · « **Reply #15 on:** May 11, 2019, 10:53:29 AM »

Kenny, have you made a draw force curve on the 60 inch to see when it starts to stack or do you have an idea how long draw it can be shot with comfortably?

kennym · « **Reply #16 on:** May 11, 2019, 01:32:44 PM »

Bue, I did . Let me see if it is where it’s sposed to be in a minute.

Forwardhandle · « **Reply #17 on:** May 11, 2019, 02:25:52 PM »

Well I have made 2 64" & a couple 60" the 64 " is a sweet bow you can keep the limbs off the string with a 1/2 " higher brace height the 64" could probable be drawn 34" or better

kennym · « **Reply #18 on:** May 11, 2019, 02:49:07 PM »

So we do have longer ones out there!!

Here is the DFC on the 60”

Sent from my iPhone using Tapatalk

Forwardhandle · « **Reply #19 on:** May 11, 2019, 03:12:08 PM »

Bue I draw my 60"s to 31" with no stack smooth drawing for sure I think Kenny did a 58" to !

News:

Author Topic: FHLB Plans (Read 4755 times)

Users currently browsing this topic: