INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: K-Mag Bushing ?  (Read 1845 times)

Offline Gcg2

  • Trad Bowhunter
  • **
  • Posts: 16
K-Mag Bushing ?
« on: May 25, 2019, 01:59:46 PM »
Hey guys, i've got a 70's K-Mag and the front bushing is loose and spins but I can't get it out. It has moved out about an 1/8 but won't go any further just spins. I'd like to get it out so I can replace it. If anybody can help let me know. Thank you..
Logged

Offline TRAP

  • Trad Bowhunter
  • **
  • Posts: 2747
Re: K-Mag Bushing ?
« Reply #1 on: May 26, 2019, 08:03:39 PM »
I believe I’d thread a bolt into the bushing and heat the bolt with a propane torch.  It’s likely some epoxy holding the insert in.  The heat will soften the epoxy maybe
Logged
"If you don't like change, you're going to like irrelevance even less" Gen. Eric Shinsheki

"If you laugh, and you think, and you cry, that's a full day, that's a heck of a day." Jim Valvano.

Offline Gcg2

  • Trad Bowhunter
  • **
  • Posts: 16
Re: K-Mag Bushing ?
« Reply #2 on: May 26, 2019, 09:35:22 PM »
Thank you very much Trap.. That worked great  :shaka:
Logged

Offline TRAP

  • Trad Bowhunter
  • **
  • Posts: 2747
Re: K-Mag Bushing ?
« Reply #3 on: May 26, 2019, 10:42:22 PM »
Cool, I’ll send you a bill...

Just kidding, glad it worked out
Logged
"If you don't like change, you're going to like irrelevance even less" Gen. Eric Shinsheki

"If you laugh, and you think, and you cry, that's a full day, that's a heck of a day." Jim Valvano.
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©