Author Topic: Riser Handle design  (Read 2257 times)

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Riser Handle design
« on: May 30, 2019, 07:36:49 PM »
I don't know if this has ever come up.   I have been doing this bow building stuff for about 8-9 years and never have I read about where to carve out the throat of the handle in relation to the shelf.  I put my shelf 1 1/4" above center.  Should the deepest part of the handle be at center or just below the shelf, or anywhere in between.  Like where is the best balance anyway. 

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Riser Handle design
« Reply #1 on: May 30, 2019, 07:52:32 PM »
Try to get the shelf right above the knuckle. Then it it pointing where your finger is if you was pointing.

Sent from my SM-J737V using Tapatalk

High on Archery.

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Re: Riser Handle design
« Reply #2 on: May 30, 2019, 08:18:53 PM »
"Then it it pointing where your finger is"  sorry don't quite get that part..  Can I see some of your Bows so I can get an idea. 

I have looked at a few risers,  and noticed that the throat of the handle is about one knuckle below the shelf;  does this sound right.  I found this link it may help still have to finish reading it.   https://buildyourownbow.com/grip-and-shelf-location-on-a-recurve/
« Last Edit: May 30, 2019, 11:42:20 PM by Wolftrail »

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Riser Handle design
« Reply #3 on: May 31, 2019, 09:58:11 AM »
You want the arrow close to your hand. With your hand closed and the index finger pointing your arrow should be right on top of your hand.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Re: Riser Handle design
« Reply #4 on: May 31, 2019, 10:47:57 AM »
You want the arrow close to your hand. With your hand closed and the index finger pointing your arrow should be right on top of your hand.
Oh,  "and the index finger pointing"   whats the purpose of pointing.

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Riser Handle design
« Reply #5 on: May 31, 2019, 11:03:29 AM »
Cause that's where the arrow is gonna go when ya shoot it.

Offline Wolftrail

  • Trad Bowhunter
  • **
  • Posts: 1152
Re: Riser Handle design
« Reply #6 on: May 31, 2019, 11:30:43 AM »
Heck I knew that.....….

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Riser Handle design
« Reply #7 on: May 31, 2019, 12:50:45 PM »
Ha guess Elroy tol you.  :laughing:
High on Archery.

Offline Bvas

  • Trad Bowhunter
  • **
  • Posts: 2458
Re: Riser Handle design
« Reply #8 on: May 31, 2019, 01:43:02 PM »
I put the deepest part of the throat at center. Then cut shelf in 1” to 1-1/8” above center. With hair rest added, I am 1-1/8” to 1-1/4” above center.
Some hunt to survive; some survive to hunt

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Riser Handle design
« Reply #9 on: May 31, 2019, 02:28:27 PM »
Ok but where ya stick yer finger?

Offline Bvas

  • Trad Bowhunter
  • **
  • Posts: 2458
Re: Riser Handle design
« Reply #10 on: May 31, 2019, 02:42:06 PM »
Ok but where ya stick yer finger?
That’s kinda personal :biglaugh:
Some hunt to survive; some survive to hunt

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: Riser Handle design
« Reply #11 on: May 31, 2019, 06:37:25 PM »
If you have a crooked finger, where will the arrow go? :bigsmyl:

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Riser Handle design
« Reply #12 on: May 31, 2019, 08:32:18 PM »
To a place in PA.  :bigsmyl:
High on Archery.

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Riser Handle design
« Reply #13 on: June 01, 2019, 06:14:32 AM »
In dah garage door:)

My shooten stinks:)




Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Riser Handle design
« Reply #14 on: June 01, 2019, 12:53:30 PM »
I wondered how long it was gonna take you to use that pic Mr. Elroy  :laughing: :laughing:
High on Archery.

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Riser Handle design
« Reply #15 on: June 01, 2019, 12:57:24 PM »
I had to install a special ole fart anti virus mug shot app in my PC first.

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Riser Handle design
« Reply #16 on: June 01, 2019, 03:29:50 PM »
Well you can use for your own pics to now  :bigsmyl:
High on Archery.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©