Author Topic: Recurve Thoughts (Read 2041 times)

Forwardhandle · « **on:** September 21, 2019, 04:26:26 AM »

I have been thinking about building a curve for a while and looking at other designs but the problem I'm finding is at my 31" draw is most 60" are not rated(stack) past 29" I have a custom 64"Black Widow curve that's a great bow thought of tracing the limbs but really don't have time for the R&D involved to get it right & would really like a 58"-60" blind bow , any body got any ideas or thoughts ?

Bully · « **Reply #1 on:** September 21, 2019, 04:51:59 AM »

Not a recurve, but look at Shrew Bows. He builds short bows that draw past 32". His bows may give you some ideas.

http://www.shrewbows.com

kennym · « **Reply #2 on:** September 21, 2019, 08:04:44 AM »

Ritchie, I think you already have a short blind bow , so you are turning to recurves to be able to keep building bows. Better hope the missus don't catch on...

You may wanna look at a static tip bow . ?

Forwardhandle · « **Reply #3 on:** September 21, 2019, 01:21:16 PM »

Well Kenny if she hasn't caught on by now she needs some new glasses....lol every time I start considering a short curve at my draw I conclude I would be better off with redesigning the FH hybrid for a short long draw bow I might have found the perfect solution with my current project will know soon !

kennym · « **Reply #4 on:** September 21, 2019, 01:24:28 PM »

And you can stick the hybrid in yer rubber boot while waitin on that buck. Try that with a recurve! LOL

Roy from Pa · « **Reply #5 on:** September 21, 2019, 02:23:09 PM »

Anyone can build a recurve...

Longbows are special....................

Mad Max · « **Reply #6 on:** September 21, 2019, 02:51:25 PM »

Quote from: Roy from Pa on September 21, 2019, 02:23:09 PM

Anyone can build a recurve...

Longbows are special....................

Crooked Stic · « **Reply #7 on:** September 21, 2019, 04:06:41 PM »

Well you could get a taller blind

I am not so sure you would like a short curve with your draw length anyhow. I think the FHLB design with the shorter riser will be the ticket. Mine now 58 in. has a 13.5 riser and will go 32 no problem and still good string angle.

Flem · « **Reply #8 on:** September 21, 2019, 04:52:09 PM »

How about a 50's style recurve, like a Thunderbird or Blackhawk. Lots of working limb for your draw.

Forwardhandle · « **Reply #9 on:** September 21, 2019, 05:03:05 PM »

I'm trying to picture those bows wasn't the Black hawk pretty much a long bow with static recurve tips ?

Shredd · « **Reply #10 on:** September 21, 2019, 05:09:17 PM »

Just to give you another option or Idea... Take a look at the bow that I just built... It is 64" ntn but there was no stacking up to 30"... You may be able to shorten it... I am actually in the process of making another set of limbs... I am gonna make them a bit shorter... The Shrew bow looks like a cool bow... If I was to go short I would possibly try that design... There is a guy on one of these forums that builds a nice looking 48" recurve...

Flem · « **Reply #11 on:** September 21, 2019, 05:55:14 PM »

Sorry should have been more specific. I think all the bows were black hawks, I was thinking of the "Bee"
model. I always liked those recurves that handled like longbows. Go figure

monterey · « **Reply #12 on:** September 21, 2019, 06:28:50 PM »

I have a '70's vintage 54" Shakespeare Necedah that draws stack free to 31". If you are interested I could probably trace the limbs and measure the other specs.

Mad Max · « **Reply #13 on:** September 21, 2019, 07:25:26 PM »

I think all recurves 62" could be drawn to 31"

Roy from Pa · « **Reply #14 on:** September 21, 2019, 07:33:02 PM »

Heck fujimo draws 31.5 inches on the trilam I made him.

Forwardhandle · « **Reply #15 on:** September 21, 2019, 08:00:55 PM »

I have a old 60" sears recurve up in the rafters that I shot four years before I even knew my draw length or what stack was but in hind sight it had a lot of finger pinch Im sure a 62" would work , Mike I appreciate the offer but still tossing ideas a round , part of the problem with starting a new design is the $$ to get to where you want, I would probably be smarter just to make more changes in the FH design I all ready have a lot of $$ invested and if I add addtional reflex & different riser I would have a pretty good guess at the stack & glass or carbon combos , if there was a proven recurve design that drew stack free @31 60" where there was data for stack etc , I might give it a go but I havent found any !

Forwardhandle · « **Reply #16 on:** September 22, 2019, 11:16:52 AM »

That's a recurve for sure

KenH · « **Reply #17 on:** September 22, 2019, 11:28:23 AM »

You should see it unstrung

Mark R · « **Reply #18 on:** September 22, 2019, 01:39:11 PM »

Hey Rich looks like your morphing into the Shrew design, checkout the shrew lil favorite for a recurve. All the R/D has already been done and possibly already went through what you have to come up with there designs, you may be able to modify a bit for yourself, many have been through this kind of thing before, just like the wheel. Have fun and good luck to ya.

Mark R · « **Reply #19 on:** September 22, 2019, 01:55:44 PM »

For even more ideas take a look at Java Man bows and the Toelke 52" Troll.

News:

Author Topic: Recurve Thoughts (Read 2041 times)

Shredd

Users currently browsing this topic: