Author Topic: Action wood Riser (Read 3433 times)

Forwardhandle · « **on:** October 17, 2019, 04:01:24 PM »

Has any one used a single peace non footed action wood for a take down riser here ?

Flem · « **Reply #1 on:** October 17, 2019, 04:23:57 PM »

I might have got one in the bow swap. What is non-footed?

Forwardhandle · « **Reply #2 on:** October 17, 2019, 04:29:53 PM »

I should have said non I-beam I never made a take down so I guess my question is ,is it doable ? I don't see why it wouldn't be but figured I would ask plus ,I think it would look cool !

Roy from Pa · « **Reply #3 on:** October 17, 2019, 04:44:06 PM »

Like this?

Forwardhandle · « **Reply #4 on:** October 17, 2019, 04:48:44 PM »

Yep thanks Roy looks nice

Flem · « **Reply #5 on:** October 17, 2019, 04:50:03 PM »

I think this is action wood?

Forwardhandle · « **Reply #6 on:** October 17, 2019, 04:56:47 PM »

That sure looks like action wood I want to use this color action wood if I can get a big enought peace !

Roy from Pa · « **Reply #7 on:** October 17, 2019, 05:03:28 PM »

Some old, short, gray haired pap pap guy from Linneus Missouri made that bow for me:)

Flem · « **Reply #8 on:** October 17, 2019, 05:07:28 PM »

Whats that little doohickey on your bow Roy? You using sights

Roy from Pa · « **Reply #9 on:** October 17, 2019, 05:47:01 PM »

Clem Clem Clem, dear boy..

That an arrow holder...

Flem · « **Reply #10 on:** October 17, 2019, 09:19:40 PM »

Whats wrong with the nice shelf Kenny cut for you?

Forwardhandle · « **Reply #11 on:** October 18, 2019, 03:08:24 AM »

I guess Kenny didn't send him the instruction manual with that one Flem

Roy from Pa · « **Reply #12 on:** October 18, 2019, 06:36:13 AM »

He made it a right handed bow.

I converted it to amberdextious.

That way I kin shoot dah deer on either side of the tree.

Ya don't get out much do ya?

Crooked Stic · « **Reply #13 on:** October 18, 2019, 07:54:25 AM »

The spectraply we can get now instead of the old Rutland stuff is not as good in my opinion. I think with a TD mid fifties and up for sure needs a ibeam. I have stabilized it before and it takes a lot of resin but needs to be clamped when curing. Seems the glue gives up at 200 degrees.

Roy from Pa · « **Reply #14 on:** October 18, 2019, 08:01:27 AM »

I may have a piece of the older stuff here, not sure how long it is.

What length ya need, Ritchie?

Pat B · « **Reply #15 on:** October 18, 2019, 08:03:25 AM »

I have a T/D recurve made by Jeffery back in the late 80's with an Actionwood riser without an I beam.

Mad Max · « **Reply #16 on:** October 18, 2019, 08:54:21 AM »

There is some new stuff out there that has 3 to 1 layers on the pictures I’m seeing on here, very thin layers.

Flem · « **Reply #17 on:** October 18, 2019, 12:39:53 PM »

Quote from: Roy from Pa on October 18, 2019, 06:36:13 AM

He made it a right handed bow.

I converted it to amberdextious.

That way I kin shoot dah deer on either side of the tree.

Ya don't get out much do ya?

Forwardhandle · « **Reply #18 on:** October 18, 2019, 02:42:18 PM »

Thanks all for the help here is some of the stuff that I have been getting from kenny , thanks for the offer Roy but I want to try some that are current even if I need to I- beam as I want to make a few going to have less room to store bows in the retirment house but bigger shop

Roy from Pa · « **Reply #19 on:** October 18, 2019, 03:56:58 PM »

That middle one is purty..

News:

Author Topic: Action wood Riser (Read 3433 times)

Users currently browsing this topic: