Author Topic: Anyone know a good guide on tree identification???  (Read 877 times)

Offline Keith Wolfe

  • Trad Bowhunter
  • **
  • Posts: 113
Anyone know a good guide on tree identification???
« on: December 24, 2019, 07:58:12 PM »
Out at my folks 30 minutes from my house. I know how to identify osage and pecan but wish i knew how to identify other trees for bow wood. 40 of our 65 acres wooded sloping down gradually in riparian creek woods. Tons of trees but i dont know what they are!!!!


Offline KenH

  • Trad Bowhunter
  • **
  • Posts: 1042
Re: Anyone know a good guide on tree identification???
« Reply #1 on: December 24, 2019, 10:31:55 PM »
This time of year it's really hard to ID tree species.  If you local extension agent doesn't have a freebie guide to trees, the best I know of (as a former forester myself) is the Peterson Field Guide series "A Field Guide To Eastern Trees" (Eastern US and Canada.  If you're west of the Mississip  there is also a 'Western Trees' volume.   

Living Aboard the s/v ManCave

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Anyone know a good guide on tree identification???
« Reply #2 on: December 25, 2019, 08:42:31 AM »
The Peterson's Guide or Audubon Tree Guild or like Ken said your local Extension Service or check with the State University. Maybe your folks or a neighbor could help.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Keith Wolfe

  • Trad Bowhunter
  • **
  • Posts: 113
Re: Anyone know a good guide on tree identification???
« Reply #3 on: December 25, 2019, 08:48:42 AM »
Thanks, I ordered both. Going to cut some osage tomorrow after I hunt. I know there a few types of oaks but don't know how to tell.

Offline OkKeith

  • Trad Bowhunter
  • **
  • Posts: 1237
Re: Anyone know a good guide on tree identification???
« Reply #4 on: December 25, 2019, 09:18:49 AM »
My Wife (also a Forester and a Texan) completely agrees with Ken!

She also recommended the Trees of Texas Tree Guide by Stan Tekiela.

OkKeith

In a moment of decision the best thing you can do is the right thing. The worst thing you can do is nothing.
Theodore Roosevelt

Offline Keith Wolfe

  • Trad Bowhunter
  • **
  • Posts: 113
Re: Anyone know a good guide on tree identification???
« Reply #5 on: December 25, 2019, 05:41:02 PM »
Thanks, I'll check that one out too. Found some incredible straight osage easily today. Cutting down tomorrow.

Offline Keith Wolfe

  • Trad Bowhunter
  • **
  • Posts: 113
Re: Anyone know a good guide on tree identification???
« Reply #6 on: December 25, 2019, 07:20:20 PM »
Found many nice small to medium straight branches of osage without cutting down a whole tree. They range from 1.5" to 7-8" diameter. What is y'alls preferred size in this scenario. 6-8ft sections straight or natural reflex. Many options. Cutting with reciprocating saw tomorrow after I hunt. Thanks

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Anyone know a good guide on tree identification???
« Reply #7 on: December 26, 2019, 02:10:35 AM »
I've made some really nice "pole" bows with 2" diameter shoots. I saw them in half lengthwise and bind them back together with small pieces of wood between to allow good air circulation. I don't worry about reflex now but add it later. With these small diameter poles you use sapwood and heartwood. Generally there isn't much heartwood anyway. I've made bows up to about 60# like this.
 7" to 8" diameter stuff is good and you'll get 3 or 4 staves from each.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©